Face Chaser - Sanyo Xacti VPC-HD1010GX Instruction Manual

FACE CHASER

As you record, the face chaser detects the subject's face, and adjusts the
brightness and focus in a way that produces a clear and bright photo of the
subject's face.
1
Display the NORMAL Mode Shooting Menu (page 49), select "FACE
CHASER", and press the SET button.
-: The face chaser function is enabled.
.: The face chaser function is not enabled.
2
Select the desired setting, and press the SET button.
h This completes the face chaser setting.
HINT
When the face chaser is set to ON...
i Each face in the Shooting Screen is marked with a green frame.
i Faces that are in focus are marked with a double green frame.
i When shooting begins, the frames marking the faces that are in focus
change to orange.
i The scene select function setting automatically changes to =.
i When you play back an image that was captured using the face chaser
function and magnify it, the magnified image will be centered on the face(s)
that were focused on.
CAUTION
i The face chaser function does not work while the digital zoom is being
used.
i The face chaser function does not work when zooming in or out.
i The face chaser function may not work when the subject's face in the
monitor is relatively small or appears dark.
116
English