Summary of Contents for Sybo Tech Singapore Pebby
- Page 1 User Guide for Pebby robot USER GUIDE Sybo Tech Singapore Pte Ltd www.getpebby.com...
- Page 2 User Guide for Pebby robot 1. Preface 1.1. In the box Robot Pebby; Dockstation; Сharging сable for the Dockstation/Pebby; Spheres; Getting Started Guide. 1.2. Pebby requires Wi-Fi 2.4GHz; Bluetooth Low Energy (BLE) 4.+;...
- Page 3 User Guide for Pebby robot 1.3. System characteristics of the robot Voltage of the robot charger: 5B, 1A. Operating temperature: 0 to +30 degrees Celsius; Storage and transportation temperature : -20 to +50 degrees Celsius. Battery capacity: 2000 mAh. Battery voltage: 3.7 V.
- Page 4 Sleep mode – Pebby is off and waiting for a remote connection; Idle mode – Low power operation mode. Pebby is on, but it's not currently used; Busy mode – This status shows that somebody wake up robot with shake.
-
Page 5: Getting Started
User Guide for Pebby robot 2. Getting Started 2.1. Installing the application To start working with Pebby you need to install the Pebby application Then you need to log in (enter your login and password) or register an account;... - Page 6 Color indication of a successful start: when turned on, the robot blinks twice, then lights up green; Close the Pebby panel and place it in the sphere. Check the sphere lock is securely closed (see Photo 3); In the future, you no longer need to switch the toggle switch to turn on the robot.
- Page 7 To stop working with Pebby, you must turn it off; Turn Pebby off means to put it into a sleep mode. To do this, please, use the button “shutdown” of the robot in the application settings while playing;...
- Page 8 To start charging, please change it in sleep mode; You can charge Pebby through a USB cable by connecting it to a power supplier source (5V); Also, you can use the wireless charger for Pebby – Dockstation (comes with the kit);...
-
Page 9: Remote Connection
Remote connection requires the Internet connection on your smartphone; To have a remote access you need to activate your Pebby, by linking it to your account; After successful activation, your activated robot will be displayed on the application central tab;... - Page 10 User Guide for Pebby robot Dockstation produces a information about the robot while Pebby is in a sleep mode. It is possible while Pebby is near Dockstation with an Internet connection. Moreover, Dockstation provide remote connection and control of several Pebby robots (up to 5) for simultaneous connection to them by different users.
- Page 11 Dockstation. This button helps to return to the factory settings. (see photo 5). 4.3. Robot Pebby is a two-function robot for working with the user both directly and remotely. 4.3.1 Activation To activate and configure Pebby, perform the following steps: ...
-
Page 12: Network Configuration
Then turn on the robot by spinning it two times; When the robot turns on, go to the Pebby application, сlick on the available robot and select Bluetooth connection; After successful connection click on the robot and select the Network Settings tab;... - Page 13 User Guide for Pebby robot 5. Joint use of the robot with different devices The sharing of the Pebby robot by different users requires an installed application on all devices that will be used. The required platform is iOS, Android.
-
Page 14: Remote Update
Then turn on the robot by spinning it two times; When the robot turns on, go to the Pebby application, click on the available robot and select Bluetooth connection; After successful connection click on the robot and select the Update tab;... -
Page 15: Handling And Safety
Pebby. Do not scratch or damage the Pebby casing; Do not point Pebby laser on people. Do not point the laser in a dangerous direction, which can harm the pet (including windows, heaters, etc.); Do not expose Pebby to liquid, moisture, dust, excessive heat;... - Page 16 Color indication of overheating: the robot blinks red; Color indication of the robot waiting for connection: green-yellow. Dockstation: Connected to power supply: LED – green; Connected to home network: LED – red; Exchanges data with the Pebby robot: LED – blue. www.getpebby.com...
-
Page 17: Troubleshooting
In work process might be problems like: I don’t see my home Wi-Fi network (both devices) This problem can occur if you are trying to connect your Pebby to either a 5GHz frequency range network or a hidden network. Unfortunately, Pebby doesn’t work with 5GHz networks, but since most routers support both 5GHz and 2.4GHz frequencies, you should be able... - Page 18 Pebby. Pebby is linked to another account Your Pebby can only be registered to one user account at a time. You cannot register it to multiple accounts. If you need to register a Pebby to a different account, delete it from the account it is currently registered to, open ‘Home’...
- Page 19 User Guide for Pebby robot Please open the ‘Settings’ menu on your phone, then go to ‘Privacy’ and then ‘Microphone,’ and make sure you have allowed the Pebby to use your phone’s mic. 10. Contact us hello@getpebby.com www.getpebby.com...
Need help?
Do you have a question about the Pebby and is the answer not in the manual?
Questions and answers