Increasin / Decreasin The Messa e Volume ....P14-15 Increasin / Decreasin The Messa e Timer......P16-17 reminder base that can talk to the user if they are Increasin / Decreasin The Warnin Li ht Timer ....P18-19 not drinking enough, and warns the carer if the user Turnin The Ni ht Li ht System On / O ......P20-21...
Page 3
Its chunky open broad stable base. It has a blue tint discreet recessed spout that controls The electronic reminder base is ideal ended handle allows people with which makes the drink look cool and the flow of liquids including stage 2...
The Droplet® Reminder Base: The Reminder Base contains 3 systems 1. Reminder Messa es • The base has 3 pre-set messages designed to encourage the user to drink. They can be replaced with up to 3 personalised messages which you can record yourself. If the user does not...
Note: Rechargeable batteries are not suitable. • Droplet® is very simple to use. Once Droplet® is turned on it will talk you through the current settings. If you want to alter any of the settings first press the relevant function button and it will talk...
• 2 red lights in the base will flash slowly to indicate ‘power on’. Turning Droplet® O : RED BUTTON for 3 seconds. • To turn Droplet® Off, press and hold the • You will hear a message stating “Droplet® O ” and the red lights in the base will disappear.
Replace Battery Warning: • Droplet® will indicate that the batteries need to be replaced when either: - the blue lights in the base start pulsing slowly during use. - Droplet® states “Batteries low, please replace batteries” when you switch Droplet® on.
• The message volume can be set to 4 different volume levels (1 minimum - 4 maximum). • To check the current volume level, press and release the RED BUTTON. Droplet® will state the current level. • To change the volume level, press and release the RED BUTTON again and it will change to the next volume level.
The reminder messages can also be turned off. • To check the current message timer setting, press and GREEN BUTTON. Droplet® will state the current release the setting. • To change the message timer setting, press and release the GREEN BUTTON again and it will take you to the next setting.
Page 10
• To check the current warning light timer setting, press and release the YELLOW BUTTON. Droplet® will state the current setting. • To change the warning light timer setting, press and release the YELLOW BUTTON again and it will take you to the next setting.
• To turn this system off press and hold the YELLOW BUTTON for 3 seconds. Droplet® will state “Night light system o .” • Please note, that if the night light system has been turned off the message and warning light systems will continue to operate throughout the night unless one or both of them have been turned off.
• To keep the message and move to the next, press and release BLUE BUTTON. • Droplet® will play the next message, then it will give you the same options to keep the message or record a new one.
To Record Reminder Messages: • To record your own message, press and release the BLUE BUTTON. The system will play you a message, then it will ask you if you want to keep the message or record a new one. •...
Page 14
Personalised Message Suggestions: • Each personalised message can be up to 15 seconds in length. To help you, here are some suggestions. They have been created to allow you to insert the users name in a motivating and encouraging message. o “<INSERT NAME>...
The Reminder Messa es’ process on page 23. At the end of the playback of all messages Droplet® will state “All messages recorded. To delete all messages and return to default messages press blue and green buttons together for three seconds.”...
WARNING! Not suitable for children under 36 months. Small parts could be a choking hazard. The Droplet® base is NOT suitable for use in the microwave. • Gently clean by using a soft damp cloth or anti-bacterial wipe.
Need help?
Do you have a question about the REMINDER BASE and is the answer not in the manual?
Questions and answers