Gigastone GB-6420B User Manual

Product Bluetooth Headset
Brand Gigastone
Pairing Name GB-6420B
Wireless Version 4.2+EDR
Chipset CSR8635
Battery Capacity 160MAh
Playback Time 10+hours(Max volume)
Talking Time 10+hours
Charge Time 1.5-2Hours
Call Answer/End Short press MFB
Play/Pause Short press MFB
Volume+/- Short press +/-
Music Back/FWD Long press +/-
Siri System Press MFB 2~3second
LED
1.When charging,red light keeps bright.After a full charger,light changes to blue.
2.When battery power is insufficient,the red light flashes 2 times and comes with voice prompt.
Pairing Steps
1.Keep press MFB about 3seconds,the light will red&blue,entering the pairing status.
2.Turn on mobile phone wireless function to search the wireless earphone name.
3.Click the earphone name to connect.When the connection is successful,the blue light will flash.
4.Password:enter"0000"if your mobile phone needs to enter password.
Here,congratulations,the connection is successful and you can enjoy now.
How to make the Dual Pairing?
1. First let device A connect with the headset. Then turn off the headset and turn off device A's Bluetooth; then use device B to connect with the headset,
and then back to A device bluetooth name click connection again. At this point, successfully connect 2 devices. .
2. First let device A connect with the headset, and then directly cancel device A's Bluetooth connected, then the headset is in a pairing state; then use device
B to connect with the headset, and then back to device A's Bluetooth name click the connection again, then successfully connect 2 devices
Keep your wireless earphone to be used around your phone.The straight wireless distance without block is about 10 meters between
your phone and wireless earphone. Beyond this distance,the sound quality may decline and the earphone will lose connection.
Learn how to reconnect the earphone.
1.Your wireless earphone will reconnect your phone automatically.
2.If your wireless earphone does not reconnect,please press the MFB one time or through your phone's wireless menu to reconnect manually.
Restore the factory settings.
Make the headset in charging status,The light will be RED .Then long press the MFB until make a "du du "voice prompt.Restore done.
Earhook Wireless Stereo Headset User Manuel