Madison U3M Instruction Manual

Madison Company
FEATURES
Standard 5 feet of interconnection cable
Simple push-button calibration
Output 4- 20 mA / 20- 4 mA
Built-in temperature compensation
Optional High Level Alarm relay
dual pole output 5A/230 Vac
Optional RS485 communications with
calibration, diagnostics and data
logging software
PLC compatible
Three Wire Operation
APPLICATIONS
Food and Beverages
Water
Pharmaceutical

Mounting Options

Mounting Adaptors Available:
1"- 3/4" NPT or 1"- 1/2" NPT
ENVIRONMENTAL
Temperature : - 40 to 140°F(- 40 to 60°C) PVC Body
Pressure : 1 –10 bar
Installation Category : Class II
MECHANICAL
Std. Interconnection Cable :
5'- Belden #9503 : 3 Pair-24AWG
1) Supply : 12 - 30 Vdc 1 pair shielded (Red/Blk.)
2) Output : 4 - 20 mA 1 Pair shielded (Blk./Green)
3) Comm.:RS485 (optional) 1 Pair Shielded (Blk./Wht.)
Optional Relay Cable :
5'- Belden #9493 : 3-18 AWG unshielded
1) Relay (optional) DPST 5A /230Vac
Enclosure : PVC-94V0
Ingress Protection : NEMA 4X (IP65)

ELECTRICAL SPECIFICATIONS

Power DC 12 to 30 VDC , 0.07 A max @ 24 Vdc
R load = (Vs — 6)
ABM300
Output 4-20 mA Output 6.1 uA resolution
Optional - communications port RS485
- Relay DPST 5A / 230 Vac
Madison Company 27 Business Park Dr., Branford, CT 06405
1.800.466.5383 Tel: 203.488.4477
Sensor solutions for
today and the future
™
/
24 mA
Fax: 203.481.5036
INSTRUCTION MANUAL
For Model U3M Ultrasonic Sensors
4.0"
4.0"
New !
10 echoes / sec. Or Higher
OPERATIONAL
Accuracy : +/-0.10% of max. range
(in lab using 4-20 Ma current output)
+/-0.25% of max. range (typically in field)
Response Time: Standard. Unit
: Std. with less damping
: Fast Protocol
Beam Angle : 10 - 12 degree at –3dB
Loss of Echo : Programmable from 1 min. to 4 min.
(Default = 1 min.) 22mA or 2 mA output
Temp. Comp. : In transducer
Calibration : Push-button or programmable
via optional communications port
Diagnostics :(Echo Profile) via communications port
High Level Alarm 5A. Relay has hysteresis and delay
of 5% of the tank height, this can be adjusted using
Communications software. Relay's state changes at
20mA calibration point or at 4 mA calibration point. To
switch the above "push-button" or "communication soft-
ware" can be used . Using push-button press and hold
until the light goes off. Continuous green light indicates
alarm at 20mA. ,blinking green indicates alarm at 4 mA.
Relay "ON" set point is adjustable using communica-
tions software.
CATALOGUE # -
refer to Catalogue Number Structure for Ordering
information. In Product Documentation refer to page 3.

TECHNICAL SPECIFICATIONS

Range Operating Range
Code in Liquids
148 0.33 - 6 ft.
0.10 - 1.8 m
Mounting 1"NPT
Fast Motion Detector
2 - 3 echoes / sec.
6 echoes / sec.
** I.R. 10 echoes / sec.
Or higher ** IF Required
On the Web return to Home Page &
Resolution
0.03"
0.7 mm
MF-017 Rev C ECN 6221, 10/2011
Page 1 of 2
Mounting
NPT
1"