Brydge 7.9 Manual

INSERT/REMOVE
1
Place your iPad into the hinges with the home button
on the right, and your Brydge placed on a flat surface
2 PAIR
Turn on by switching the small silver
button on the front left of your Brydge to
the right. A green dot will appear.
3 CHARGE
{
|
}
\
A continuous flashing blue light indicates your
Brydge has less than 10% battery life left
Lift iPad to test the hinge grip. Your iPad and
Brydge should be held tightly together
Put your Brydge into pairing mode by
pressing and holding the long silver button on
the front left of your Brydge for 3 seconds
Insert the supplied MICRO USB cable
7.9
If iPad is loose, remove and give the hinges a
gentle squeeze. Repeat this process until your
iPad is held firmly
Settings Bluetooth
Bluetooth
Bluetooth
On
Brydge7.9 Keyboard Connected
On your iPad, under Settings>Bluetooth,
select Brydge7.9
shift
Charging is confirmed by a solid red light under
the right shift key. Your Brydge is fully charged
when the light turns off
NOTE: Charging takes up to 3 hours
To remove, grab your iPad and pull
straight up, with one hand firmly holding
your Brydge against a hard surface
i