LG LFCS25663 series Owner's Manual page 18

Hex Socket Wrench Phillips Screwdriver
NOTE: It is always recommended that the doors be removed when it is necessary to move the refrigerator through a
narrow opening. If it is necessary to remove the handles follow the directions below.
NOTE: Handle appearance may vary from illustrations on this page.
DOOR HANDLE REMOVING
1. Removing Refrigerator Handle
Loosen the set screws with the 3/32 " Allen wrench
and remove the handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 " Allen wrench.
Mounting
Fasteners
2. Removing Freezer Drawer Handle
Loosen the set screws located on the lower side of
the handle with the 3/32" Allen wrench and remove
the handle.
NOTE: If the handle mounting fasteners need to be
tightened or removed, use a 1/4 " Allen wrench.
REFRIGERATOR INSTALLATION
TOOLS YOU MAY NEED
10 mm
1 / 4 in
3 / 8 in
Set Screw
Allen Wrench
Flat Head Screwdriver
DOOR HANDLE INSTALLATION
1. Reinstalling Refrigerator Handle
Place the handle on the door by aligning handle
footprints to fit mounting fasteners and tighten
the set screws with a 3/32" Allen wrench.
NOTE: If the handle mounting fasteners need to
be tightened or removed, use a 1/4 " Allen wrench.
Mounting
Fasteners
2. Reinstalling Freezer Drawer Handle
Place the handle on the door by aligning handle
footprints to fit mounting fasteners and tighten
the set screws on the bottom of the handle with
a 3/32" Allen wrench.
NOTE: If the handle mounting fasteners need to
be tightened or removed, use a 1/4 " Allen wrench.
1/4 in
3 / 32 in
Allen Wrench