Solarlux Glass Room System 1 Manual

Advertisement

Introducing the SOLARLUX Glass Room at John Lewis
About
Based in Bissendorf, Lower Saxony, Germany, Solarux was founded in 1983 and is now considered the
market leader for folding glass doors and glass structures. Company founder and owner Herbert Holtgreife
places the highest demands on his products in terms of design, quality and energy efficiency standards,
with international architects and designers globally recognising the Solarlux brand.
By choosing a Solarlux product, you are ensuring ongoing support for the entire duration of the project. You
will be assigned your own personal advisor, who will assist you in all project related matters. We will handle
all deadlines and queries directly with you, so there are no disruptive idle times due to coordination
problems or misunderstandings with third parties.
The next steps...

Glass rooms

Product dimensions

Preparation

Base
Glass rooms
Glass rooms are designed as non-thermally broken structures or cold rooms, meaning they heat up in the summer
and cool down in the winter and are not energy efficient. They are, for want of a better description, an extension of
your garden. A SOLARLUX glass room protects you from the elements, such as wind and rain, and allows you to enjoy
being outside in your garden for longer throughout the year. In the spring and autumn, when the sun is out but the
air outside is cooler, the glass room will naturally warm up through a process known as solar gain. If it is chilly,
switching on the HeatScope will bring the room back up to temperature. In the summer, the whole patio area can be
opened up by sliding and turning the glass facades so you can enjoy the warm summer breeze as you rest
comfortably in the shade of your awning. However you choose to use your SOLARLUX glass room, one thing is sure -
you are guaranteed to enjoy more time outside relaxing, entertaining or just admiring all the hard work you have put
into your garden.
Product dimensions
Glass Room System 1: 3,000mm wide x 3,000mm deep x 2,800mm high (rear wall plate) 2,100mm high
(front eaves beam).
Customer User Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Glass Room System 1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Solarlux Glass Room System 1

  • Page 1 They are, for want of a better description, an extension of your garden. A SOLARLUX glass room protects you from the elements, such as wind and rain, and allows you to enjoy being outside in your garden for longer throughout the year.
  • Page 2 • Glass Room System 2: 4,000mm wide x 3,000mm deep x 2,800mm high (rear wall plate) 2,100mm high (front eaves beam). Accessories We have carefully selected two additional products that we feel would improve your enjoyment of your glass room even further: •...
  • Page 3 The pictures below highlight a clear area in preparation for a glass room. Base We recommend that you use the services of a reputable builder to ensure that the depth of the foundations is correct whilst allowing for your specific ground conditions. Access to drains may also need to be considered. The table below indicates the weight of each glass room.
  • Page 4 • Please see our separate PDF document Builder’s Information Sheet for more details. Customer User Guide...
  • Page 5 Installation Installation will be undertaken by SOLARLUX and our customer services team will liaise with you on a regular basis to check that your requested installation date is on track and all preparations have been completed by you. During the...

This manual is also suitable for:

Glass room system 2

Table of Contents