Connections - Panasonic TX-40FS400E Operating Instructions Manual

Connections

External equipment and cables shown are not
supplied with this TV.
Please ensure that the unit is disconnected from the
mains socket before attaching or disconnecting any
cables.
Check the terminal type and cable plugs are correct
for connection.
Use a fully wired HDMI compliant cable.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor,
otherwise distortion of image / sound may occur or
operation of other equipment may be affected.
Please also read the manual of the equipment being
connected.
Terminals
8 7
1 CI slot (p. 13)
2 Headphone jack (p. 13)
3 USB 1 - 2 port
This symbol indicates DC operation
4 DIGITAL AUDIO
5 HDMI1 - 2 (p. 12, 13)
6 Terrestrial / cable terminal
1
2
3
4
5
6
(p. 11, 12)
7 AV (COMPONENT / VIDEO)
8 ETHERNET terminal
Basic connections
Mains lead
Mains lead
(supplied)
Insert the mains plug firmly into place.
When disconnecting the mains lead, be absolutely
sure to disconnect the mains plug from the mains
socket first.
Aerial
TV
RF cable
Terrestrial aerial
For DVB-C, DVB-T, Analogue
DVB-via-IP client connection
This TV has DVB-via-IP client function and can connect
to DVB-via-IP server or SAT>IP compatible servers to
receive broadcast streaming.
It is recommended to connect to DVB-via-IP server
with a LAN cable.
Wired connection
TV
LAN cable (Shielded)
Use Shielded Twist Pair (STP) LAN cable.
DVB-via-IP server
RF cable
Terrestrial aerial
Satellite dish
(p. 13)
(p. 12)
AC 220-240 V
50 / 60 Hz
Cable
Cable
English
11