Advertisement
WaveSmart
Installation Manual
WaveSmart Ruggedized and HD
Splitters will now come with adapters
housed in Clearfield's new Staging
Plate, designed for ease of installation
and enhanced density capabilities.
WaveSmart Splitters will ship with a
foam cradle surrounding the staging
plate which, depending on the
application, can be removed and
replaced by foam strips which slide over
the tabs on each end of the staging
plate.
Replacing Foam Cradle with Foam Strips:
144/288/576/1152 PON Cabinets:
One splitter: Insert the staging plate horizontally,
with foam cradle in place, into the staging area at
the top of the cabinet.
Direct: 763.476.6866 • National: 800.422.2537 • www.SeeClearfield.com • techsupport@clfd.net
Optical Splitter Staging Plate
®
_________________________________________________________
Manual 019657 REV A - March 2018
Two splitters: Remove foam cradles from staging
plates, and place foam strips. Insert staging plates
vertically into staging area at top of cabinet.
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Clearfield WaveSmart
- Page 1 Splitters will now come with adapters housed in Clearfield’s new Staging Plate, designed for ease of installation and enhanced density capabilities. WaveSmart Splitters will ship with a foam cradle surrounding the staging plate which, depending on the application, can be removed and...
- Page 2 WaveSmart Optical Splitter Staging Plate ® Installation Manual _________________________________________________________ 432 PON Cabinet: Below Grade FDH Makwa: Insert the staging plate, with foam cradle in place, Remove foam cradle from staging plate. Staging into the staging area at the top of the cabinet.
Need help?
Do you have a question about the WaveSmart and is the answer not in the manual?
Questions and answers