Awetek AV12G User Manual

Advertisement

AV12G User Manual
Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly.
Make sure to read this manual carefully before using this product. Please note that specification and
information are subject to changes without prior notice in this manual. Any change will be integrated in the
latest release. The manufacturer assumes no responsibility for any errors or omissions in this document.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV12G and is the answer not in the manual?

Questions and answers

Summary of Contents for Awetek AV12G

  • Page 1 AV12G User Manual Thank you for purchasing the tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prior notice in this manual. Any change will be integrated in the...
  • Page 2: Hardware Description

    1. Summary Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or internet. The most advanced technology of GPS and AGPS dual positioning. 2. Applications  Vehicle rental / Fleet management etc ...
  • Page 3: Specification

    4. Specification Content Spec. Dim. 105mm x 60mm x 20mm Weight 144g Network GSM/GPRS Band 850/900/1800/1900Mhz GSM chip SIMTK6260 GPS chip UBLOX GPS sensitivity -159dBm GPS accuracy Cold status 35-80s Time To First Fix Warm status 35s Hot status 1s 110-220V input Wall charger output...
  • Page 4 5.2 Battery and Charger Do charge the battery to capacity in 8 -12 hours for first time. Please use the battery and charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full battery can standby 80 hours. After first use, the battery usually should be charged fully in 5-- 8 hours.
  • Page 5: Quick Operation Command

    6. Quick Operation Command  Note: Default password is 123456 6.1 Change password SMS format: pwd+old password,new password Example: pwd123456,666888 it will reply sms: “OK! New password: 666888. Safe keeping! ”  Note: password should be 6 digits Arabic numbers. 6.2 Set admin phone number: ...
  • Page 6: Command List

    7. Command list .
  • Page 7 8. Working Mode Power consumption Working Mode Wake up way Power consumption Working command Normal Working Mode Sleep123456 40--60 mah/h GSM+GPS+GPRS Time sleeping Mode Sleep123456 SMS+Calling 4 mah/h time (GPS+GPRS) Shocking Sleeping Sleep123456 SMS+Calling+shocked 4—40mah/h mode shock (GPS+GPRS) (default) 9. Cautions ...

Table of Contents