Introduction; Tools Required For Service - Bradford White ElectriFLEX HD CEHD 50 Service Manual

Introduction

This service manual is designed to aid service and maintenance professionals on the function, proper
diagnosis and repair of Bradford White Commercial Electric Water Heaters.
The text and illustrations in this manual provide step by step instructions to facilitate proper operation
and troubleshooting procedures. Contact the Bradford White Technical Support Group immediately if
diagnosis cannot be made using the methods described in this service manual.

Tools Required for Service

Multi-Meter: A digital type is strongly recommended. This device is used to measure electrical
values. The meter you select must have the capability to measure volts AC, volts DC, Amps, micro-
amps and ohms.
Thermometer: Used to measure water temperature. An accurate thermometer is recommended.
Drain Hose: Used to for emptying the tank.
Various Hand Tools: Pipe wrench, channel locks, Allen wrench set, screw drivers (common & philips),
¼" nut driver, pliers (common & needle nose), 1-1/16" and 1-1/2" deep well sockets, wire cutters, wire
strippers, wire crimpers, and flashlight.
SAVE THIS MANUAL FOR FUTURE REFERENCE REV 1/16 238-51791-00A
3