Summary of Contents for Aqua Cooler WM4F
- Page 1 SERIES Usage and Care Manual Models: WM4F, WM4SS, WM5, WM5SS Your Partner in Cool.
-
Page 2: Product Diagram
PRODUCT DIAGRAM TECHNICAL SPECIFICATIONS Water Reservoir 5 L water tank is fabricated from industrial grade 304 stainless steel for longevity. Uses R134A refrigerant which is non-toxic, non-flammable and environmentally sympathetic. The refrigerant flow is controlled by a capillary tube, which has no Refrigeration moving parts. -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should be followed to reduce the risk of fire, electric shock and injury to persons or property. Read all instructions before using any appliance. Keep combustible material such as furniture, This appliance must be placed on an even and bedding, pillows, clothes and/or papers away flat surface. -
Page 4: Installation
The installation must be in accordance with AS/NZS 3500.1 and AS/NZS 3500.2. Pipe jointing is a trade skill and Aqua Cooler recommends this process is performed by qualified personnel only. Ensure proper ventilation by allowing 75 mm clearance on each side of the fountain. -
Page 5: Drain Installation
Apply Watermark certificated Type N solvent cement on the end of the Watermarked AS/NZS 1260 40mm PVC pipe and insert into the Aqua Cooler drain outlet fitting. Firstly to the inside of the WM Series drain fitting and then to the external surface of the pipe end (marked area). (See Figure.1) # Please ensure the solvent cement is applied in full even coats to all applicable surfaces. -
Page 6: Removing From Service
The fan motor on this unit seldom needs oiling. If required, a few drops of SAE 10 oil should be used. • Aqua Cooler recommends the water fountain is cleaned every month, ensuring there is no blockage in the condenser or in the back of the unit. Please remove all potentially harmful factors to prevent any scratch or damage to the unit. - Page 7 MARKS Spec No. WMTS 105:2016 SAI GLOBAL WMK26317 (Lic. No.) The appliance is comply with applicable ACMA regulatory arrangements (Regulatory Compliance Mark) and WaterMark WMTS 105:2016.
-
Page 8: Exploded Diagram
EXPLODED DIAGRAM Your Partner in Cool. -
Page 9: Spare Part List
SPARE PART LIST Description Code Description Code Glass filler (optional) SPM1 Pressure reduce SPM15 Bubbler valve SPM2 Motor SPM16 Stainless-steel lid SPM3 Condenser cover SPM17 Waste drain gasket SPM4 Fan blade SPM18 Bubbler connection SPM5 Condenser bracket SPM19 Waste drain elbow SPM6 Condenser SPM20... - Page 10 It excludes compressor relays, overloads and all other components of this appliance. This extended warranty does not include service, repair or labour costs or any pickup and/or freight charges. Aqua Cooler at its sole discretion may replace the cooler with a new or refurbished cooler of a similar age.
- Page 11 Your Partner in Cool.
- Page 12 Your Partner in Cool. Phone Numbers Address Internet Sales: 1300 278 226 U14, 2-12 Knobel Court www.aquacooler.com.au Service: 1800 278 226 Shailer Park QLD 4128 info@aquacooler.com.au...
Need help?
Do you have a question about the WM4F and is the answer not in the manual?
Questions and answers