Advertisement
Table of Contents
559-734-7451 800-367-5480 FAX 559-734-7460
INSTALLATION INSTRUCTIONS
2009+ Dodge 1500 2WD
FRONT STABILIZER BAR
Thank you for purchasing a quality Hellwig Product.
PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION
1
SAFETY:
BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND
CHOCK TIRES.
NOTE:
TO EASE INSTALLATION AND TO PROPERLY ADJUST THE BAR, THE WEIGHT OF THE
DO NOT
VEHICLE MUST BE ON THE SUSPENSION, AS IF DRIVING DOWN THE ROAD.
RAISE VEHICLE BY THE FRAME.
NOTE: THIS SWAY BAR IS DESIGNED TO REPLACE THE FACTORY INSTALLED SWAY BAR AND
REUSES THE FACTORY SUPPLIED END LINKS.
7708 ( R-7708 )
11/19/2009
Advertisement
Table of Contents
Related Manuals for Hellwig 7708
Summary of Contents for Hellwig 7708
- Page 1 559-734-7451 800-367-5480 FAX 559-734-7460 INSTALLATION INSTRUCTIONS 2009+ Dodge 1500 2WD FRONT STABILIZER BAR Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY BEFORE STARTING YOUR INSTALLATION SAFETY: BEFORE STARTING YOUR INSTALLATION, BE SURE TO SET PARKING BRAKE AND CHOCK TIRES.
- Page 2 6. Turn wheels full lock left and then right, check for clearance on tires, wheels and steering components. 7. After one week of driving recheck your installation. Re-check on regular basis thereafter. ATTENTION INSTALLER: BE SURE THAT THE CUSTOMER RECEIVES THIS INSTRUCTION SHEET, ALL IMORTANT NOTE CARDS AND THE WARRANTY FORM 7708 ( R-7708 ) 11/19/2009...
Need help?
Do you have a question about the 7708 and is the answer not in the manual?
Questions and answers