Initial Configuration - Scale Mellanox SN2010 Quick Start Manual

Initial Configuration
After logging into the switch via the console port, begin the initial configuration wizard. The following is an example
configuration:
Configuration wizard
Do you want to use the wizard for initial configuration?
Step 1: Hostname? [switch-2f5160]
Step 2: Use DHCP on mgmt0 interface? [yes]
Step 3: Use zeroconf on mgmt0 interface? [no]
Step 4: Primary IPv4 address and masklen? [0.0.0.0/0]
Step 5: Default gateway?
Step 6: Primary DNS server?
​ ​
Step 7: Domain name? s calecomputing.local
Step 8: Enable IPv6? [yes]
Step 9: Admin password (Enter to leave unchanged)?
You have entered the following information:
1. Hostname: switch-2f5160
2. Use DHCP on mgmt0 interface: no
3. Use zeroconf on mgmt0 interface: no
4. Primary IPv4 address and masklen: 10.0.0.1/24
5. Default gateway: 10.0.0.1
6. Primary DNS server: 10.0.0.1
7. Domain name: scalecomputing.local
8. Enable IPv6: no
9. Admin password (Enter to leave unchanged): (unchanged)
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
Zero-touch is disabled
Configuration changes saved.
To return to the wizard from the CLI, enter the
command from configure mode.
switch-2f5160 [standalone: master] >
©
​ ​ Scale Computing 2018
​ ​
n o
​ ​
1 0.0.0.1
​ ​
1 0.0.0.1
​ ​
n o
​ ​
" configuration jump-start"
Launching CLI...
​ ​
y es
​ ​
1 0.0.0.1/24
6