HID identiCLASS User Manual page 10

identiCLASS Developer Tool Kit User Guide
This layout provides two antennas adjacent to each other, so a passport can be presented in
any orientation and it will still be read. OCR readers can be mounted in the centres of the ID3
large antennas.
4.5 3300 Reader Core and external small antenna
Connect the ID1 antenna to the external antenna connector on the 3300 Reader Core using the
supplied cable (4091A01 10cm):
This layout provides a small antenna connected to the reader core which is also small, making
this layout ideal for space-restricted applications as well as mobile / hand-held devices.
4.6 3300 Reader Core, full-size contact card reader and large antenna
Connect the full-size smart card adapter to the SAM connector on the 3300 Reader Core using
the supplied cable (4091A04 15cm). Connect the ID3 antenna to the external antenna
connector on the 3300 Reader Core using the supplied cable (4091A01 10cm):
This layout provides a contact card reader, plus a large antenna for contactless cards, in the
centre of which an OCR reader can be mounted.
Page 10 of 26
HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly
restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and
are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement,
please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.
June 3, 2010