Related Manuals for Viking Range LPKPDR
Summary of Contents for Viking Range LPKPDR
- Page 1 Installation Guide LPKPDR - Universal LP Conversion Kit for Professional & Designer Ranges/Rangetops...
-
Page 2: Table Of Contents
Table of Contents Warnings _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Kit Contents _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Regulator Conversion _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5 Infrared Broiler Conversion _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6... -
Page 3: Warnings
IMPORTANT– Please Read and Follow! DANGER Fire/explosion hazard. IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH. • DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. -
Page 4: Kit Contents
LP Orifice Conversion Kit Contents Burner Type Size Quantity Infrared Broiler Sealed Type 1 Sealed Type 2 1.07 Designer Surface Burner Designer Surface Burner Designer Surface Burner Designer Surface Burner Designer Surface Burner Designer Surface Burner Designer Surface Burner Designer Surface Burner Open Type 3 Griddle Grill... -
Page 5: Regulator Conversion
Regulator Conversion RV48CL 1/2 PSIG NAT-5 LPG-10 Flip Cap Hex Nut Cap Sealed Surface Burner Models • Identify regulator type from rear of range/rangetop located underneath main top assembly. Open Surface Burner Models • Identify regulator type from front of unit by removing grates, burner bowls and grate support from far left side of range/rangetop. -
Page 6: Infrared Broiler Conversion
Infrared Broiler Conversion IMPORTANT: The infrared broiler orifice must be changed from rear of range before unit is installed. Locate bag labeled IR Broiler Orifice. Remove nut securing 90 degree fitting and broiler tubing to rear of range. Broil Nut Remove Orifice from 90 degree fitting and replace with orifice from bag labeled IR Broiler Orifice. -
Page 7: Surface Burner Conversion
Surface Burner Conversion Sealed Type 1 Item #1 Item #2 Locate bag labeled Sealed Burner Orifice Type 1. Remove the venturi (Item #1) by turning counterclockwise. Use a 11/32” (9 mm) socket or nut driver to remove orifice (Item #2) and replace it with orifice from bag labeled Sealed Burner Orifice Type 1. -
Page 8: Sealed Type 2
Surface Burner Conversion Sealed Type 2 Item #1 Item #2 Item #3 Locate bag labeled Sealed Burner Orifice Type 2. NOTE: If the burner is a PowerPlus™ Burner (check control panel), use orifice kit 011915-000 to convert this burner only. WARNING DO NOT use this orifice for any other top burners. -
Page 9: Designer Range & Rangetop
Surface Burner Conversion Designer Range & Rangetop Item #1 Item #2 Item #3 Locate bag labeled Designer Burner Orifice. Remove the screws (Item #1) and set burner base aside (Item #2). IMPORTANT: Burner bases must be handled carefully to prevent igniter wires from becoming disconnected. -
Page 10: Orifice Locations
Orifice Locations (#61) (#65) (#57) (#67) DGRT301 (#63) (#65) (#57) (#61) (#67) DGRT361 (#60) (#67) (#58) (#70) DCCG130 DSCD130... -
Page 11: Open Type 3
Surface Burner Conversion Open Burner Type 3 Adjustment Air Shutter Screw Locate bag labeled Open Burner Orifice Type 3. Remove screws securing open surface burner to burner box and remove open surface burner. NOTE: Igniter wire must be disconnected to remove burner. Loosen air shutter screw and adjust opening to 7/16”... -
Page 12: Griddle Conversion
Griddle Conversion (for models equipped with griddle) U-Shape Burner with Spark Ignition Air Shutter Air Shutter Air Shutter Adjustment Screw Set Screw Orifice Hood Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. Remove screws securing griddle burner to burner box. -
Page 13: Straight Tube Burner With Spark Ignition
Griddle Conversion (for models equipped with griddle) Straight Tube Burner with Spark Ignition Screw (Front of Burner) Screw (Rear of Burner) Air Shutter Adjustment Screw Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. Remove screws securing griddle burner to burner box. -
Page 14: Straight Tube Burner With Glow Bar Ignition
Griddle Conversion (for models equipped with griddle) Straight Tube Burner with Glow Bar Ignition Screw (Front of Burner) Screw (Rear of Burner) Air Shutter Adjustment Screw Remove screws securing glow bar igniter to burner box and place glow bar igniter aside. Remove screws securing metal plate to burner box located underneath griddle burner and remove metal plate. -
Page 15: Grill Conversion
Grill Conversion (for models equipped with grill) Lift flavor grids from unit. Lift flavor grid support from unit. Remove screws securing rear bracket to burner box. Remove screws securing flame shield to burner box. Lift out left and right side burner box liners. Remove screws securing burner to burner box. -
Page 16: Wok Conversion
Wok Conversion (for models equipped with wok) Overhead View Shutter Orifice Remove center trivet and/or grates, center ring and grate support. Lift and remove burner from unit. Loosen air shutter screw and adjust opening on burner to 5/8” and tighten air shutter screw. Remove orifice by turning counterclockwise and replace with orifice from bag labeled Wok Orifice. -
Page 17: Bake Conversion
Bake Conversion “L” Shaped Air Shutter Adjustment Screw Remove oven racks and rack supports. Remove oven bottom by sliding toward rear of range, then lift upward. Remove screws securing toe grille to unit. Remove screws securing burner support bracket to frame of unit and remove burner support bracket. -
Page 18: U" Shaped
Bake Conversion “U” Shaped Air Shutter Air Shutter Air Shutter Adjustment Screw Set Screw Orifice Hood Remove oven racks and rack supports. Remove oven bottom. Remove screws securing bake igniter to bake burner. Remove screws securing bake burner shield to oven burner box. Remove screws securing bake burner to oven burner box. -
Page 19: Rating Label Locations
Rating Label Locations When LP/Propane conversion is complete, complete the enclosed conversion label and place it next to the rating label. The rating label locations can be found as follows: Professional Open Burner Range & Rangetop - On the interior left side of the burner box. To access this label, remove the left side grates and grate support. - Page 20 Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 F20525F EN (061518)