Advertisement

INSTRUCTIONS FOR USE:

Plug the mains lead into a suitable power socket and connect your instrument to the input socket of the
amplifi er with a suitable guitar lead (this lead is not supplied with the amplifi er, but is normally supplied with
the electric guitar). Finally, press the Power Switch to the ON position, the power LED will glow and your
amplifi er is ready for use.

IMPORTANT SAFETY INSTRUCTIONS:

READ AND KEEP THESE INSTRUCTIONS HEED ALL WARNING.
• If, after you have followed the instructions outlined above, your amplifi er fails to function, please contact your
dealer. Under no circumstances should the amplifi er be opened. Leave all servicing to qualifi ed personnel.
• Electrical appliances must never be used in conditions of high humidity or heat.
To prevent any risk of fi re or electric shock, never spill or splash liquids on the amplifi er.
Should this happen, unplug the power cable from the mains outlet immediately.
• We would like to draw your intention to the instructions printed on the notice attached to the back of
the amplifi er.
• Exposure to extremely high noise levels may cause permanent hearing damage (especially when
using headphones). Please use this amplifi er responsibly for you and your neighbourhood.
MARKING & CONFORMITY:
1. The CE mark on this product means it conforms to the EMC Directive (89/69/EEC), CE marking Directive
(93/68/EEC) and Low Voltage Directive (72/23/EEC). .
2. The «Crossed-out Wheeled Bin» is to draw your attention to the WEEE (Waste Electric & Electronic
Equipment) Directive (2002/96/EC). It means this apparatus must be collected separately for recycling.
3.«RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of the use
of certain hazardous substances in electrical and electronic equipments, such as: Mercury, Lead, Cadmium,
Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Esthers (PBDE).
DISTRIBUTOR/DEALER
User's manual
Guitar Amplifi er
STA30 DSP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STA30 DSP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Stagg STA30 DSP

  • Page 1: Important Safety Instructions

    3.«RoHS compliant» means this device conforms to the Directive (2002/95EC) on the restriction of the use of certain hazardous substances in electrical and electronic equipments, such as: Mercury, Lead, Cadmium, Hexavalent Chromium, Polybrominated Buphenyl (PBB) and Polybrominated Diphenyl Esthers (PBDE). Guitar Amplifi er DISTRIBUTOR/DEALER STA30 DSP...
  • Page 2: Front Panel

    FRONT PANEL: BACK PANEL: 1. INPUT: Plug your guitar in here. We recommend that you always use a STAGG high-quality shielded WARNING: This amplifier must be earthed. Please check that the supply voltage details given on the guitar cable to prevent any background noise interference or unwanted feedback..

Table of Contents