Minimizer FKPB2B Installation Instructions

WARRANTY
Minimizer Floor Mats are backed by a Lifetime Manufacturer's Warranty and are guaranteed against
fl aws due to faulty materials and/or unintended production variations. This warranty extends only
to the original purchaser and excludes damage caused by abnormal use or conditions, including but
not limited to extreme abrasive conditions and/or excessive exposure to chemicals such as bleach,
gasoline and other fuels.
MINIMIZER PRODUCTS
• TESTED AND TORTURED
DAILY BY TRUCKERS FOR TRUCKERS
Headquartered in Blooming Prairie, Minnesota, USA, Minimizer manufactures poly
truck fenders, poly toolboxes, customized mud fl aps, fl oor mats, and bracket kits.
Family owned and operated for nearly 3 generations, Minimizer parent company
Spray Control Systems, Inc., was founded in 1983. Minimizer aims to provide
products tough enough to please tough people in a tough industry. All Minimizer
products are made in the USA.
Manufactured by Spray Control Systems, Inc. (SCSI)
500 Minimizer Way, Blooming Prairie, MN 55917
800.248.3855 • Fax: 888.583.7540
www.minimizer.com
IMPORTANT SAFETY INFORMATION
READ BEFORE INSTALLING OR USING MINIMIZER FLOOR MATS
PETERBILT - FKPB2B & FKPB3B
• 365 – 2008 to 2016
• 384 – 2008 to 2016
• 388 – 2008 to 2016
Safety Instructions for Installation
• Use only with the specifi ed vehicle make, model and year.
• Do not install on top of other fl oor mats.
• Install each fl oor mat with the Minimizer logo facing up.
• Use each fl oor mat only in its proper location in the vehicle.
• Install and use a retention hook for the driver side fl oor mat.
• Make sure that the fl oor mats fi t properly in your vehicle fl oor space.
• Do not place additional fl oor mats on top of the Minimizer fl oor mats.
• Carefully follow each of the Installation Instructions for Minimizer Floor Mats on the following pages.
Safety Instructions for Vehicle Operation
• Before starting or operating the vehicle, verify that the Minimizer fl oor mats are installed
correctly, that the driver side mat is secured by a retention hook, and that the driver side
mat does not interfere with the accelerator, brake, or clutch pedal.
TM • • Make sure there are no loose objects in the vehicle that could possibly interfere with the
operation of the accelerator, brake, or clutch pedal.
• If your Minimizer fl oor mat becomes loose, stop the vehicle at the next safe location.
Re-install the fl oor mat properly and securely. If that is not possible, remove the fl oor mat
and place it in a location where it will not interfere with safe operation of the vehicle.
• Inform all drivers of these warnings before allowing them to operate a vehicle equipped with
Minimizer fl oor mats.
Minimizer fl oor mats are specifi cally designed for certain vehicles and may be used safely only
with those vehicles. VERIFY THAT THE MAKE, MODEL, AND YEAR OF THE VEHICLE IN WHICH YOU ARE
INSTALLING THE FLOOR MATS ARE IDENTIFIED AS BEING COMPATIBLE WITH THE MINIMIZER FLOOR
MATS YOU HAVE SELECTED.
If you have questions about these instructions or proper installation of your Minimizer fl oor mats,
please contact Minimizer at (800) 248-3855.
• 367 – 2008 to 2016
• 386 – 2006 to 2016
• 389 – 2008 to 2016
* See next page for detailed model/fi t specifi cations
AUGUST 2015