Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Dahua DHI-MPT310
- Page 1 Mobile Portable Terminal Quick Start Guide Version 1.0.1...
-
Page 2: Table Of Contents
Table of Contents Product Introduction ......................1 1.1 Overview ......................... 1 1.2 Specifications ......................1 1.3 General Structure ....................1 Basic Operation ........................ 4 2.1 Login ........................4 2.2 Main Interface ......................5 2.3 Snapshot/Record Video ..................5 2.4 Record Audio ......................7 2.5 Files .......................... - Page 3 Welcome Thank you for purchasing our mobile portable terminal! This quick start guide will help you become familiar with our mobile portable terminal in a very short time. Before installation and operation, please read the following safeguard and warning carefully! Important Safeguard and Warning 1．Electrical safety ...
- Page 4 When replace the battery, please make sure you are using the same model! RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Important Please set a password for admin if it is your first time to use the device. Change the password regularly to enhance device data safety.
-
Page 5: Product Introduction
1 Product Introduction 1.1 Overview This series product is a mobile portable terminal for persons of public security, insurance, traffic police and etc. It can realize audio/video record, snapshot, GPS, and video surveillance, record view and download, audio talk, emergency command via 3G/4G/Wi-Fi and etc. The device is designed based on the Android OS. - Page 6 Figure 1-1 Figure 1-2...
- Page 7 Figure 1-3...
-
Page 8: Basic Operation
2 Basic Operation 2.1 Login Press the Power button on the right side of the device (see Figure 1-2), you can boot up, shut down the device, or let it sleep. After device boots up, it goes to login interface by default. Please follow the steps listed below. -
Page 9: Main Interface
2.2 Main Interface After you logged in, the main interface is shown as below. See Figure 2-2. Figure 2-2 2.3 Snapshot/Record Video , system goes to the snapshot/record interface. See Figure 2-3. - Page 10 Figure 2-3 Please refer to the following sheet for detailed information. Note Tap it to set camera parameters. Snapshot mode: Tap the icon to go to camera settings interface. You can enable/disable snapshot sound, set white balance, exposure, video quality and resolution.
-
Page 11: Record Audio
Note : Flashlight function is off. Note In record video mode, tap to enable compensation light. Tap to switch to peripheral camera to snapshot or display HDMI signal. Note Please make sure you have connected the peripheral camera or the HDMI signal. -
Page 12: Files
to begin record. The circle becomes during the recoridng process. Tap again to stop record. to check audio file. 2.5 Files Here you can view photo, video file or audio file. ， you can go to the file manager interface. Here you can view photo, audio/video file. -
Page 13: Device
Figure 2-6 2.6.2 Device In this interface, you can set camera basic parameters, register device to the platform, set storage parameters, add SMS whitelist and set audio talk function. From Settings->Device, you can go to the following interface. Here you can set camera, platform, and video storage parameters. -
Page 14: System
Figure 2-7 Name Function Camera Set snapshot, record encode, network transmit encode, OSD parameters. The device and platform connection parameters. After you register the device Platform to the platform, you can use platform to control and mange device remotely. It is to set data to storage on the Micro SD card. Device max supports 128GB expansible storage space. -
Page 15: Account
RESET FACTORY DEFAULT SETUP IS GOING TO CLEAR ALL DATA ON THE DEVICE BUILT-IN STORAGE SPACE. BE CAREFUL! Figure 2-8 2.7 Account Here you can manage user basic information. , you can go to the following interface. See Figure 2-9. -
Page 16: Plate Recognition
Figure 2-9 Name Function Here you can add new user, change user authorities, change password, and etc. Account to add new user. Tap a user, you can go to the user informaiton interface. Here you can search user information, modify rights, modify password, add/delete fingerprint and etc. - Page 17 Please refer to the following sheet for detailed information. Note Tap it, device can use the peripheral camera to snapshot or view the HDMI signal source. Note Please make sure device has connected the peripheral camera or the HDMI signal device. Put the camera facing the plate number and then tap the icon, device can display recognition results window.
-
Page 18: Platform Connection
3 Platform Connection You can control and manage device via platform. 3.1 Device Settings Note Please make sure the network connection is OK and device is online so that it can be added to the platform. Please follow the steps listed below. Step 1 Set platform connection parameters. -
Page 19: Platform Settings
IP Address Input platform server IP address. Remote Port Input platform server listening port. The default setup is 9500. Local port Input device listening port. The default setup is 37777. Step 4 Enable platform connection function and then tap OK. 3.2 Platform Settings Please follow the steps listed below to login the platform. - Page 20 The proxy port of each device is unique. It shall be the same as the port of other device. Registration ID It is the same as the device ID in Figure 3-1. User name/password It is the same as the mobile portable terminal device. The user name is admin and the password is what you set when you first login.
Need help?
Do you have a question about the DHI-MPT310 and is the answer not in the manual?
Questions and answers