Advertisement
QUAD ENVELOPE MANUAL V.1
CONTROLS
ATTACK:
Sets the rate of attack stage from zero to max.
HOLD:
Adjusts the hold time that the voltage is at its
maximum value after the attack is done rising and
before the decay starts falling.
DECAY:
Adjust the rate of decay to sustain.
SUSTAIN:
Adjust to set the sustain value.
RELEASE: Sets the rate of release to zero.
The LEDs to the right of these sliders indicate the
position of the slider (brightest red for sliders set
all the way to the right).
PG. 5
Advertisement
