Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Burks Manuals
  4. Water Pump
  5. GV Series
  6. Installation and operation manual

Burks GV Series Installation And Operation Manual

Condensate return systems
Hide thumbs
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
INSTALLATION AND OPERATION MANUAL
Condensate Return Systems - Series: GV
The receiver tank is NOT a pressure vessel. It MUST be vented to atmoshere to prevent pressure buildup. Any
internal pressure other than that due to the weight of fl uid in the tank IS UNSAFE - Warranty is void if receiver
tank is pressurized.
IMPORTANT!
Read all instructions in this manual before operating pump.
DO NOT work on pump until you are sure pump and associated piping are totally depressurized,
pump and motor have cooled down, and electricity to the motor has been shut off and locked out.
As a result of Crane Pumps & Systems, Inc., constant product improvement program, product
changes may occur. As such Crane Pumps & Systems reserves the right to change product
without prior written notifi cation.
A Crane Co. Company
420 Third Street
Piqua, Ohio 45356
Phone: (937) 778-8947
Fax: (937) 773-7157
www.cranepumps.com
Manual Index
WARNING!
83 West Drive, Bramton
Ontario, Canada L6T 2J6
Phone: (905) 457-6223
Fax: (905) 457-2650
Form No. F0925D-Rev. F

Advertisement

loading

Related Manuals for Burks GV Series

Summary of Contents for Burks GV Series

  • Page 1 Manual Index INSTALLATION AND OPERATION MANUAL Condensate Return Systems - Series: GV WARNING! The receiver tank is NOT a pressure vessel. It MUST be vented to atmoshere to prevent pressure buildup. Any internal pressure other than that due to the weight of fl uid in the tank IS UNSAFE - Warranty is void if receiver tank is pressurized.

  • Page 2: Safety First

    (fl ammable, caustic, etc.) unless the pump is specifi cally designed and designated to handle them. Other brand and product names are trademarks or registered trademarks of their respective holders. ®Burks is a registered trademark of Crane Pumps & Systems, Inc. 1984, 2001, 2003, 1/2006, 9/06 Alteration Rights Reserved...

  • Page 3: General Information

    Motors are equipped with ball bearings which are grease- Storage: packed and sealed at the factory. No additional lubrication Short Term - Burks Pumps are manufactured for effi cient is required. performance following long inoperative periods in storage. For best results, pumps can be retained in storage, as Steam Traps should be carefully checked and kept clean.
  • Page 4 Limited 24 Month Warranty Crane Pumps & Systems warrants that products of our manufacture will be free of defects in material and workmanship under normal use and service for twenty-four (24) months after manufacture date, when installed and maintained in accordance with our instructions.This warranty gives you specifi c legal rights, and there may also be other rights which vary from state to state.

  • Page 5: Returned Goods

    IMPORTANT! WARRANTY REGISTRATION Your product is covered by the enclosed Warranty. To complete the Warranty Registration Form go to: http://www.cranepumps.com/ProductRegistration/ If you have a claim under the provision of the warranty, contact your local Crane Pumps & Systems, Inc. Distributor. RETURNED GOODS RETURN OF MERCHANDISE REQUIRES A “RETURNED GOODS AUTHORIZATION”.
  • Page 6 Notes...