Advertisement
Quick Links
Advertisement
Summary of Contents for Kiyo ProPark XT
- Page 1 KIYO ProPark XT Parking Assistant Installation and Operation Manual...
-
Page 3: Purpose Of The Device
2 or 3 tran-sponders. 1. PURPOSE OF THE DEVICE The purpose of the KIYO ProPark XT Parking Assist is to make the maneuvering and parking of the vehicle easier. Unlike the everyday reverse backup radars, the KIYO ProPark XT can detect objects in a 25-cm-close vicinity, which is especially useful when parking in a garage or in a narrow parking lot. - Page 4 (solar radiation, refraction, rainy weather, snow, dirty transponders, etc.). The device is [e7] certificated. The KIYO ProPark XT Parking Assist is device designed to facilitate safe parking, but it does not replace the prudent driving by any means. The device uses the open 904 Nm wavelength, therefore it may cause disturbance in devices using the same wavelength, for example, some police LIDARs.
- Page 5 The device gives sound signals through the speaker upon activation or upon detecting a closing object. Volume control switch (VOL and OFF): The device can be turned on or off with the volume control switch, also the volume of the speaker can be adjusted with this. (When using an auxiliary switch, it is not necessary to activate the device with the volume control switch.) PWR LED status indicator:...
- Page 6 5. INSTALLATION OF THE KIYO PROPARK XT PARKING ASSISTANT The most important factor in the efficiency of the KIYO ProPark XT Parking Assistant is the number of transponders and their correct installation. The structure and the size of the car determines the number of transponders required for achieving maximal efficiency.
- Page 7 6. FRONT PARKING ASSIST FOR CARS Recommendations for the installation (Using 1 KIYO ProPark XT device with 3 transponders in a set and with 2 transponders in a...
- Page 8 With the help of the double-sided adhesive, place the indoor unit (interface) of the KIYO ProPark XT Parking Assistant in the cabin of the car. It can be placed above or below the dashboard; you decide which spot is more suitable for you.
- Page 9 The color and the labels of the cable help in the correct wiring. When using more than one set of KIYO ProPark XT devices, it is rec-ommended to use an auxiliary switch or a wireless unit.
- Page 10 The colors and the labels of the cables help in the correct wiring. In case of using more than one KIYO ProPark XT devices, it is recom- mended to install an auxiliary switch as well.
- Page 11 More regarding information can be found in the following pages. 8. INSTALLING THE AUXILIARY SWITCH (For turning all of the KIYO ProPark XT devices on or off at the same tume.) If you wish to use an auxiliary switch for the Park Assist devices, ASK...
-
Page 12: Troubleshooting, Warranty
TROUBLESHOOTING, WARRANTY If you become uncertain at any point of the installation or any ques- tions arise regarding the installation or the use of the device, please contact one of our workshops or our customer service. QUICK SOLUTIONS TO SOME PROBLEMS The device does not turn on: 1. - Page 13 The device is E7 certificated. The KIYO ProPark XT Parking Assist is device designed to facilitate safe parking, but it does not replace the prudent driving by any means. The device uses the open 904 Nm wavelength, therefore it may cause disturbance in devices using the same wavelength, for example, some police LIDARs.
Need help?
Do you have a question about the ProPark XT and is the answer not in the manual?
Questions and answers