Patented two-wire technology, cctv installation system, single channel for transmission of power, video, two-way audio, control data and two-way security/fire alarm signals, mixer, signal processor
Summary of Contents for 2Y-LINK Technology PF300A12DAASS
Page 1
CCTV INSTALLTION SYSTEM SINGLE CHANNEL for transmission of Power, Video, Two-Way Audio, Control Data and Two-Way Security/Fire Alarm Signals PF300A12DAASS CI-01-ASP-DAASS Mixer Signal Processor User Manual...
Table of Contents Descriptions Page No. The Package of System Content Product Overview 1. Mixer PF300A12DAASS 2. Signal Process CI-01-ASP-DAASS Cat.5 Cable Application Typical Wiring Specifications for Mixer and Signal Processor 7-10 1. Mixer PF300A12DAASS 2. Signal Process CI-01-ASP-DAASS 9-10...
Product Overview The system includes following parts Mixer PF300A12DAASS The Mixer should be installed near the Camera at the surveillance site 70mm Thickness (2-3/4in) 35mm(1-3/8in) 96mm(3-3/4in) PF300A12DAASS Signal Processor PN:CI-01-ASP-DAASS The Signal processor should be installed at Control room next to DVR/Monitor...
Cat.5 Cable application The Cable connecting RJ45 connector for Mixer or Signal Processor with Cat5 is as follows Note: To achieve best performance of the 2Y-LINK System, the main points for standard Cat.5 cable must be noted as follows: (1) DC resistance ≤ ≤ ≤ ≤ 10 Ohm/100m(330ft) (2) For Cat.5 cable wiring connection,RJ45 connector should be used according to usual computer network standard TIA/EIA-568-B as below:...
Typical Wiring Mixer PF300A12DAASS Surveillance Site Power Adapter (SMPS48V1.65A) Signal Processor CI-01-ASP-DAASS Control Room Camera power distance table Camera power 100~920 mA 920~1300mA 1300~1600mA 1600~2000mA (12V DC) (1.2 ~11W) (11W~15.6W) (15.6 ~19.2W) (19.2 ~24W) 5 00m 4 00m 3 00m 2 00m ≤...
Specifications for Mixer and Signal Processor Video In (from camera) 1.0 Vpp 75 Ohm Video output for Signal Processor 1.0 Vpp 75 Ohm Audio output for MIXER 0.5W 8 ohm For connecting to audio amplifier with impedance Audio output for Signal Processor 10K-40K Ohm or Audio in of DVR Alarm input Normal Open...
Detail Overview Mixer PF300A12DAASS Icon Item Description Usage or Purpose Video In For connecting to Camera (BNC plug) Connecting to terminals of RS485 PTZ Camera for controlling (I/O Terminal) the movement of PTZ Camera For connecting to 8 Ohm AUDIO OUT...
Page 8
Detail Overview Mixer PF300A12DAASS Item Icon Description Usage or Purpose DC Power to Camera Connecting to Camera rating Terminals DC12V up to 2A To indicate that the AC/DC Power LED Indicator adaptor is in proper working order Alarm output 12V/50mA...
Detail Overview Signal Process: CI01-ASP-DAASS Item Icon Description Usage or Purpose For connecting to DVR Video In or CCTV Monitor (BNC plug) Connecting to Data RS485 From Data Control unit with a pair of Controller cab for controlling PTZ (I/O Teminals) Camera For connecting to Audio AUDIO OUT...
Page 10
Detail Overview Signal Process: CI01-ASP-DAASS Item Icon Description Usage or Purpose 2Y-LINK Microphone (PVA-MIC) or microphone Microphone with output impedance Terminals 600-3000 Ohm and DC operating voltage 9-15 Volt Connecting to DC 48V DC Power Inlet Power Supply Terminals (SMPS-48V1.65A 2Y-LINK) To indicate that the AC/DC adaptor is Power LED Indicator...
Trouble Shooting Problems Possible Causes Corrective Actions No video signal; The power rating of the To select suitable MIXER model. No colour picture; camera and /or the Pictures in transmission distance do not irregular shape. match with the specifications of the Mixer specified on Page 3 of this manual.
LIMITED WARRANTY This product is warranted against defects in material or workmanship for the time periods Limited warranty covers only those defects that arise as a result of normal use of the product and does not cover any other problems, including those that arise as a result of: (i) improper maintenance or modification;...