Section 4 - Torque Specifications; Section 5 - Lubrication Specifications - Neway LSZ13 Repair Manual

Torque Specifications
4. Torque Specifications
NOTE: Torque specifications listed in this section are with clean
lubricated/coated threads, supplied by SAF-HOLLAND.
IMPORTANT: The use of special lubricants with friction
modifiers, such as Anti-Seize or Never-Seez
without written approval from SAF-HOLLAND
Engineering, will void warranty and could
lead to over torquing of fasteners or other
component issues.
General Information
The torque specifications listed throughout the manual are

applied to the lock nut and NOT the bolt.
IMPORTANT: Most of the fasteners used in this suspension
are Grade 8 bolts and Grade C lock nuts.
These fasteners have the strength and
hardness properties required for their
particular function. They MUST be replaced
with fasteners of the same grade, size and
form as the original in order to prevent
failure (Figure 10).
Failure to use the proper fasteners when
servicing the suspension could cause
component failure which, if NOT avoided,
could result in death or serious injury.
Failure to properly torque all fasteners
will result in component failure which,
if NOT avoided, could result in death or
serious injury.
All fasteners MUST be re-torqued after the first 100 hours

of service or 5,000 miles (8,000 km).
Refer to vehicle OEM for torque specifications for vehicle

frame fastener hardware.
5. Lubrication Specifications
Lubricate the suspension in accordance with the approved
lubricants (Table 2).
IMPORTANT: Replacement of SAF-HOLLAND supplied
fasteners with non-SAF-HOLLAND could result
in unpredictable performance.
Failure to maintain the LSZ suspension
with SAF-HOLLAND original parts can
result in unpredictable performance
which, if NOT avoided, could result in
death or serious injury.
8 XL-PS20059RM-en-US Rev A · 2017-02-27 · Amendments and Errors Reserved © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, NEWAY, SAF, and logos are trademarks of
Table 1
COMPONENT
Clevis Pin Assembly
SuperChamber Bracket
,
®
SuperChamber and
Service Brake Chamber
Lift Bracket, King Pin Bolt,
Crossmember, and Tie Rod
LSZ13 Pivot Connections
Figure 10
BOLT GRADE MARKINGS
GRADE 1 OR 2
LOCK NUT GRADE MARKINGS
LOCK NUT
GRADE B
3 DOTS
Table 2
GREASE
®
SAF Premium Synthetic Grease 50844001
CITGO SynDurance Premium Synthetic 460
Mystik JT-6 Hi Temp with Moly
Valvoline Palladium Grease
Chevron Delo Heavy Duty Moly 5% EP
SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
TORQUE RANGE
18-24 ft.-lbs.
24-33 N•m
47-63 ft.-lbs.
64-85 N•m
133-155 ft.-lbs.
180-210 N•m
200-250 ft.-lbs.
271-339 N•m
200-250 ft.-lbs.
271-339 N•m
GRADE 5 GRADE 8
LOCK NUT
GRADE C
6 DOTS
HUB OIL
Exxon Mobil Mobilube HD Plus
80W-90
Shell Spirax S 75W-90
Shell Spirax ASX 75W-90
Exxon Mobil Mobilube 1 SHC
75W-90
Exxon Mobil Delvac 75W-90
SIZE
5/16"-18
1/2"-13
5/8"-11
3/4"-10
3/4"-10