Table of Contents
Advertisement
The appliance must be installed with all electrical, water and drain
connections in accordance with state and local codes.
Make certain that the pipes are not pinched, kinked or damaged
during installation. Check for leaks after connection.
Note: Designed for indoor, home use only. The appliance should not
be locate next to sources of high heat or in direct sunlight. Do not
store or install the appliance outdoors, in a garage, basement or in
moist areas. Don't install in a location where the temperate will fall
below 60 . For best performance and to ensure proper ventilation,
do not install the appliance behind a cabinet door or block the base
grille.
POSITIONING YOUR WINE AND BEVERAGE COOLER
It is important for the appliance to be leveled in order to work
properly. You may need to make several adjustments to level it.
To level your appliance, adjust the front legs at the bottom of the
appliance.
When positioning the appliance, ensure that there is at least a ¼ inch
clearance at the sides and a 1 inch clearance at the back of the cooler
as this is the main outlet for heat. This will allow for adequate
ventilation.
STORING WINE
Many bottles may differ in size and dimensions. The actual number of
bottles you are able to store may vary. Bottle capacities are approximate
maximums when storing traditional Bordeaux 750ML bottles and include
bulk storage.
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
Page 6 of 12
Advertisement
Table of Contents
