1. Manuals
  2. Brands
  3. Enabling Devices Manuals
  4. Measuring Instruments
  5. 24
  6. User manual

Enabling Devices 24 User Manual

Pouring cup on flex mount 24
Hide thumbs
1
2
3

Advertisement

Table of Contents

Enlarged version
(Troubleshooting continued).
(Troubleshooting continued).
(Troubleshooting continued).
(Troubleshooting continued).
Problem: The mounting plate came off of the motor
Problem:
Problem:
Problem:
Action: First remove the cup from the mounting plate, and then reattach
Action:
Action:
Action:
the plate by gently pressing the mounting plate onto the metal shaft at the
black vinyl nut section on the back of the mounting plate. Press it on
GENTLY and leave approximately 1/4" of the metal shaft visible. Reattach
the cup to the mounting plate.
Problem: The cup rotates downward without switch activation.
Problem:
Problem:
Problem:
Action:
Action: This is letting you know that the load you have in the measuring
Action:
Action:
cup is too heavy. Remove some of the load and begin again.
Care of Unit:
Care of Unit:
Care of Unit:
Care of Unit:
The Pouring Cup on Flex Mount can be wiped clean with any household
multi-purpose cleaner and disinfectant.
The measuring cup is attached to its mounting plate via dual lock Velcro
and can be removed from the unit for cleaning purposes. Do not place in
dishwasher. (See Important Notes.)
dishwasher. (See Important Notes.)
dishwasher. (See Important Notes.)
dishwasher. (See Important Notes.)
Do not submerge
Do not submerge the unit, as it will damage the electrical components.
Do not submerge
Do not submerge
Do not use abrasive cleaners, as they will scratch the surface of the unit.
Do not use abrasive cleaners
Do not use abrasive cleaners
Do not use abrasive cleaners
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
Do not place in
Do not place in
Do not place in
Pouring Cup on Flex Mount #24
USER'S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 24 and is the answer not in the manual?

Questions and answers

Summary of Contents for Enabling Devices 24

  • Page 1 Action: First remove the cup from the mounting plate, and then reattach Action: Action: Pouring Cup on Flex Mount #24 the plate by gently pressing the mounting plate onto the metal shaft at the black vinyl nut section on the back of the mounting plate. Press it on GENTLY and leave approximately 1/4"...
  • Page 2 The Pouring Cup on Flex Mount, #24, is equipped with 1/8-inch jacks, for 2. To reattach the measuring cup, set the measuring cup in use with capability switches with 1/8-inch plugs. If you use...
  • Page 3 Action #2: Action #2: Make sure that you have TIGHT connections between the Action #2: Action #2: 2. Using the mounting clamp, attach the Pouring Cup to a Wheel switches and the jacks. There should be NO gaps! Chair, Table or Desk. Tighten the clamp enough to hold the Pouring Cup securely, but do not over-Tighten the clamp.

Table of Contents