Advertisement
Quick Links
20____
Year of Manufacture:
ASSEMBLY AND OPERATING INSTRUCTIONS
Models:
Contents
Component Identification
Safety Information
Assembly
Electrical Requirements
Controls
Operation
Maintenance and Troubleshooting
Warranty / Terms and Conditions
Electrical Drawing #: ____________________ Rev: _______
VTX
Serial #: ________________________ Date: ____/____/____
(Please log your machine's serial number and date of purchase for future reference.)
F-100 & F-1000 Flash
F-100
F-100-240
F-1000
F-1000-240
Page#
2
3
4
5
5
5
Vastex E-mail assistance
6
Purchasing & Product Info:
7
sales@vastex.com
Electrical Support:
stech@vastex.com
Tech Support, Mechanical Setup, and Operation:
techsupport@vastex.com
Doc #: 01-03-035A
Original Instructions
Vastex International, Inc.
7 Emery St
Bethlehem, Pa 18015
Phone: 610-625-2702
Web Site www.vastex.com
Authorized Representative in Europe:
Certification Experts BV
Nieuwstad 100 1381 CE Weesp,
The Netherlands
Tel : + 31 (0) 294 – 48 33 55
Fax : + 31 (0) 294 – 41 46 87
Advertisement
Related Manuals for VASTEX F-100
Summary of Contents for VASTEX F-100
- Page 1 20____ Year of Manufacture: Doc #: 01-03-035A Original Instructions F-100 & F-1000 Flash ASSEMBLY AND OPERATING INSTRUCTIONS Models: F-100 F-100-240 F-1000 F-1000-240 Vastex International, Inc. Contents Page# 7 Emery St Bethlehem, Pa 18015 Component Identification Phone: 610-625-2702 Web Site www.vastex.com Safety Information ...
- Page 2 F-100 & F-1000 Flash Component Identification Inspect all packages while unpacking and notify the shipping company if any damages are detected. The flash heater head was assembled, tested (burned-in) and packaged in perfect condition in a proven container. Review the manual before starting assembly.
- Page 3 Be certain to switch the equipment off, unplug it, and let it cool before handling any parts that become hot during opera- tion, and before storing. When handling your machinery, be aware of the following weights: F-100: 39 lbs (18 kg); F-1000: 42 lbs (19 kg)
- Page 4 Assembly Instructions Square Post Tools Required: 1/4” Wrench or nut driver 7/16”, 1/2” & 9/16” Wrench Cross Bolt 1/4” x 2-1/4” lg. Adjustable Wrench & lock nut 1) Position the legs as shown below and bolt together with 1/4” bolts and serrated lock nuts. Do not fully tighten at this time.
- Page 5 Controls Assembly Instructions Cont. Models: 9) While firmly supporting the heater head, loosen F100, F-100-240 the locking knob and adjust the position of the heat- -Power Switch er to 2-3” (5-10 centimeters) above the pallet. Turns on heater -Heat On Light 10) Adjust the flash head parallel to the pallet.
- Page 6 If your machine appears to be operating abnormally and the troubleshooting charts below do not resolve your problem, shut your unit off, unplug it, and contact Vastex for further assis- tance. In the event of a malfunction or breakdown: Shut off power to the equipment and unplug from electrical outlet.
- Page 7 The defective part or parts will be repaired or replaced at the discretion of Vastex International, Inc. If the equipment in question is less than one (1) year old, it will be shipped to the customer at no charge, with an RGA issued by Vastex for the defective part. The defective part must be shipped back to Vastex freight prepaid within 30 days or the account will be billed.