Table of Contents
Advertisement
A-1
TECHNICAL SPECIFICATIONS – LWF
WELDING WIRE SPOOL (Max. load 20 kg)
SHAFT DIAMETER
50mm
DIMENSIONS & WEIGHT (Without Welding Wire Spool)
Specification
Model
LWF
-4GS
TM
Note: Please only use this wire feeder with specified power sources, otherwise no
output will be produced and the machine may be damaged.
SAFETY PRECAUTIONS
ELECTRIC SHOCK can kill.
·
Only qualified personnel should
nance and troubleshooting work.
· Turn off the input power at the fuse box before working on other
INSTALLATION INSTRUCTION
INSTALLATION
LWF
INPUT POWER
Supplied by power source
RECOMMENDED WIRE SIZES
0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm,2.0mm
WIRE FEED SPEED
1.5 to 22 m/min
OUTSIDE DIAMETER
HEIGHT
400mm
WARNING
!
equipment connected to the welding system at the disconnect
switch or fuse box before working on this equipment.
Do not touch electrically hot parts.
Wire Feeder
TM
MODEL
TM
-4GS
300mm
WIDTH
DEPTH
230mm
perform this installation, mainte-
WIDTH
98mm
WEIGHT
620mm
14.1kg
A-1
Advertisement
Table of Contents
