Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ProMediaGear BL01
- Page 1 BL01 Universal, Adjustable Velcro Carry Harness Instruction Manual...
-
Page 2: Specifications
24 inch and (2) 12 inch Velcro straps to secure practically anything you can think of resting on the (2) (1.60 inch / 4cm) standoffs. The BL01 will keep your valuable equipment dry and easy to access off the ground mounted to your stand, tripod or railing. The jaws of the clamp are adjustable from (.50 inches / 1.37cm) to (2.10 inches / 5.33cm). - Page 3 Once installed, attach the clamp to the main body from the rear. The BL01 has been designed to allow the clamp to open fully with over 2.10 in. / 53mm of total travel to fit virtually anything you may encounter. The main body of the BL01 has been designed with a lip to allow some wiggle movement of the clamp but never allowing it rotate completely off.
- Page 4 / pack combo. We suggest keeping the weight load low as possible to keep your light stand from becoming off balanced. The BL01 may also be carried and used with our SS2P1 and SS2P3 Quick Release Strap Adapter System. If used in this manner you may wish to remove the clamp. (IMAGE 09)
Need help?
Do you have a question about the BL01 and is the answer not in the manual?
Questions and answers