Related Manuals for Ravean Heat C6
Summary of Contents for Ravean Heat C6
- Page 1 OPERATING MANUALS FOR 5V, 9V, & 12V SYSTEMS IMPORTANT SAFETY INFORMATION. READ BEFORE USE. DO NOT DESTROY.
- Page 2 CHECK BATTERY POWER CONNECTING BATTERY JACKET QUICK START Once your Ravean 5V battery is fully charged, plug the Press and hold the controller button until the LED light Grab your Ravean battery and locate the 2A output USB 5V USB power cord into the 5V USB output port. Then located on the button lights up.
- Page 3 LED lights on the LED Power Indicator will light up NOTE: if you are using a non-Ravean battery the light on the USB (see battery manual for charging unstructions). connector will turn solid once it confirms you are using a 9v 2 amp QC 2.0 battery.
- Page 4 JACKET QUICK START Before using your heated product, make sure your Once your Ravean 12V battery is fully charged, plug Press and hold the controller buttons until the LED battery is fully charged. To do this, push the power level the 12v power cord into the 12v output port.
- Page 5 JACKET QUICK START Before using your heated product, make sure your Once your Ravean 12V battery is fully charged, plug Press and hold the controller buttons until the LED battery is fully charged. To do this, push the power level the 12v power cord into the 12v output port.
- Page 6 7. DO NOT use if there is leakage or case bulges. products, misuse of your heated product and/or 8. DO NOT use battery with any non-Ravean 12v chargers. failure to properly follow the instructions may cause 9. DO NOT expose battery to any type of liquid.
- Page 7 2. Use a small amount of stain remover or down wash Ravean support. Ravean jacket, it will eventually begin to show age and FCC Notification: This equipment has been tested to treat any really dirty spots.
- Page 8 Designed in Utah | Made in China ravean.com/manuals RUM-2017...
Need help?
Do you have a question about the Heat C6 and is the answer not in the manual?
Questions and answers
Hi, I have just bought a second hand c6 and it has come with nothing but the coat and the cable attached inside the coat. What do I need to buy in order to make it all work? Thanks
The accessories needed to make the Ravean Heat C6 coat work are:
- USB to Mini USB connector for charging
- Battery pack
- Charger
These components are necessary to power and operate the heated jacket.
This answer is automatically generated