Do you have a question about the Mini and is the answer not in the manual?
Questions and answers
William Spitler
May 25, 2025
Alert Please check your device is charged. and try again. Mini 2 has charged for over 24 hours.
1 comments:
Mr. Anderson
May 26, 2025
If your NIX Mini 2 displays an alert saying "Please check your device is charged" after charging for over 24 hours, unplug the device and use a paperclip to gently press the reset button located in a small hole on the top of the NIX Mini lid.
This answer is automatically generated
George Meier
March 16, 2025
I have sold my Nix mini 2 but the new owner cannot connect. ls there something that I have to disconnect? How do I do this? do I need to have the sensor near to my phone to do this?
1 comments:
Mr. Anderson
March 16, 2025
To connect a NIX Mini 2 after it has been sold, follow these steps:
1. Wake the Device: Plug the NIX Mini 2 into a USB charging cable and charge it fully. 2. Download the App: Install the free Nix Toolkit App from the Google Play Store or Apple App Store. 3. Enable Location & Wireless Connectivity: Allow location services and wireless connectivity on your device. 4. Connect the Device: Open the Nix Toolkit App, tap the device icon in the top right, select “Connect to Nix,” and choose the NIX Mini 2 from the list. 5. Start Scanning: Place the NIX Mini 2 on a flat surface for accurate results, then save and share scans as needed.
These steps allow the new owner to set up and use the device.
This answer is automatically generated
gurulingana gouda
July 28, 2025
my Nix 2 not connecting
an unknown error occurred please reset your nix device by connecting it to a charger and then tyr again
Page 1
CONNECT YOUR DEVICE SCANNING SCANNING Make sure your box contains the The Nix Mini arrives in a “sleeping” Download the Nix Mini App from Place your Nix Mini at on any Nix Mini, charging cable, and lanyard. state. Wake it by plugging it in to any nixmini.com/apps.
Page 2
Quick Guide FAQS FAQS SUPPORT Is my device compatible with the How do I connect my Nix Mini to a Nix Mini? di erent smartphone device? The Nix Mini is compatible with iOS Open the Nix App using your current (8.0 or newer) and Android (4.4 Kit...
Need help?
Do you have a question about the Mini and is the answer not in the manual?
Questions and answers
Alert Please check your device is charged. and try again. Mini 2 has charged for over 24 hours.
If your NIX Mini 2 displays an alert saying "Please check your device is charged" after charging for over 24 hours, unplug the device and use a paperclip to gently press the reset button located in a small hole on the top of the NIX Mini lid.
This answer is automatically generated
I have sold my Nix mini 2 but the new owner cannot connect. ls there something that I have to disconnect? How do I do this? do I need to have the sensor near to my phone to do this?
To connect a NIX Mini 2 after it has been sold, follow these steps:
1. Wake the Device: Plug the NIX Mini 2 into a USB charging cable and charge it fully.
2. Download the App: Install the free Nix Toolkit App from the Google Play Store or Apple App Store.
3. Enable Location & Wireless Connectivity: Allow location services and wireless connectivity on your device.
4. Connect the Device: Open the Nix Toolkit App, tap the device icon in the top right, select “Connect to Nix,” and choose the NIX Mini 2 from the list.
5. Start Scanning: Place the NIX Mini 2 on a flat surface for accurate results, then save and share scans as needed.
These steps allow the new owner to set up and use the device.
This answer is automatically generated
my Nix 2 not connecting an unknown error occurred please reset your nix device by connecting it to a charger and then tyr again