Safety Instructions Notice: Please read all instructions carefully before using this product USER MANUAL Model No: 3584 Notice: Ensure you read and fully understand instructions before use While every attempt is made to ensure the highest degree of protection in all equipment, we cannot guarantee freedom from injury.
1. Fan Blade 2. Base Stand 3. Base Weight 4. Locking Nut 5. Large Nut 6. Fan Head 7. Base Washer 8. Fan Pole 9. Locking L screw 10. Back Fan Guard 11. Front Fan Guard USER MANUAL Model No: 3584...
6. To start Oscillation push down on the knob marked as point A in the above image. 7. To stop Oscillation pull up on the knob marked as point A in the above image. USER MANUAL Model No: 3584...
Page 5
Now fold each tab down to hold into place. Use the little nut and bolt to secure the fan guards into place, Place the little nut and bolt through the hole marked as B in the image above. Do not over tighten. Please see the image above. USER MANUAL Model No: 3584...
Page 6
5) from the top of the fan pole. Then place the fan head (part 6) on the top of the fan pole and use parts 4 and 5 to secure into place. Please see image above as reference. Do not over tighten. USER MANUAL Model No: 3584...
Page 7
USER MANUAL Model No: 3584 Height adjuster 7. Now you have fully assembled the fan, check over the product to make sure all fastenings are secure before use. STORAGE INSTRUCTIONS For storage, disassemble and clean the fan carefully as instructed and store in its original box. You may leave the fan assembled and covered to protect it from dust.
Page 8
Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. USER MANUAL Model No: 3584...
Need help?
Do you have a question about the 3584 and is the answer not in the manual?
Questions and answers