Advertisement
Quick Links
R
C
R
C
By selecting this VC product you have chosen a professional
device, which guarantees highest possible quality and
Please read the following instructions carefully before
comissioning the product in order to be able to take full
advantage of all quality features regarding this product line.
Änderungen in Technik, Design und Ausstattung vorbehalten
Installations- und Betriebsanleitung
Mounting and Operating Manual
Dear Customer!
reliability.
System Keyboard
Art. no. 14381
©
All contents of this document may change without prior notice
MO_14381/23.01.2012
MO_14511-K
Advertisement
Summary of Contents for VC 14381
- Page 1 Installations- und Betriebsanleitung Mounting and Operating Manual Dear Customer! By selecting this VC product you have chosen a professional device, which guarantees highest possible quality and reliability. Please read the following instructions carefully before comissioning the product in order to be able to take full advantage of all quality features regarding this product line.
- Page 2 Simplified Illustration of Operation of System Controller VC-SC1000M Simpilfied Illustration of Operation of System Controller VC-SC1000M ● Matrix switcher ● Intelligent high-speed dome camera (Protocol is set up for VC ex-work) Open (In 5 seconds) 1)Press FUNC and enter ●...
- Page 3 Simplified Illustration of Operation of System Controller VC-SC1000M Menu Setting System-Capacity 5.DVR/MULTI 6.Cam-PROT Monitor: 001 Hold/Q Press MENU and enter Camera: 0001 DISW Manage-Users 7.Set Baud Rate 8.Set RF the menu surface: Alarm: 0001 Enable Keyboard-ID 4.Set-time 9.Recover Default Info 22:26:35 04-08-2005 Fri.
- Page 4 DVR: Select the protocol for the current DVR. Protocol of VC, HIK has been set up ex-work. Default protocol is HIK. If any other protocol of DVR is required. Please contact the supplier. MULTI: Select the protocol of the current multiplexer. Default protocol is VC. If any other protocol of multiplexer is required. Please contact the supplier.
- Page 5 Simplified Illustration of Operation of System Controller VC-SC1000M NOTE: ● The a.m. setting can be performed by connection of front-end device. Other wise date can not read. Press any key to exit “Reading”. ● Under the state of No.2 main menu, press SHOT an enter the relay surface.
- Page 6 Simplified Illustration of Operation of System Controller VC-SC1000M 1、 Press MODE to switch DVR’s operating surface or front-end camera control surface. Select the input channel Press MODE and enter ID of DVR No of pressing digit key Press MODE and enter front-end camera control DVR’s control surface...
- Page 7 Simplified Illustration of Operation of System Controller VC-SC1000M Input channel No. from ID of DVR DVR to the matrix Press NEXT for one time Press NEXT for one administrative authority. DVR ID:01 Set DVR ID:01 <00-66> Set DVR ID:01 <00-66>...
- Page 8 Simplified Illustration of Operation of System Controller VC-SC1000M Camera protocol and baud rate are arranged in pairs as follows: Pelco-P 2400bps/4800bps/9600bps/19200bps (Details see operation manual of the camera) Pelco-D 2400bps/4800bps/9600bps/19200bp 9600bps Panasonic 9600bps Samsung 9600bps - 7 -...
- Page 9 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operation Keys of the Controller for VC Matrix for VC User Keys of the controller Usage MON+N+ENTER Select monitor(N=0~239) CAM+N+ENTER Select camera --N=0:Set up defence of current alarm 3 )* ON+MON+N+ENTER --N=1:Date&Time Display_On...
- Page 10 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operation Keys of the Controller for VC Camera for VC User Keys of the controller Usage 1) * SET+N+ENTER Set preset N SHOT+N+ENTER Go To Preset N(N=0:Start Sequence Prepos) 3 )*...
- Page 11 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operating Keys for Pelco-p & Pelco-d Keys of the controller Usage SET+N+ENTER Set Preset CLR+N+ENTER Clear Preset Go To Preset --N=1~32:PRESET --N=33: Flip (180° about) --N=34: Go To Zero Pan...
- Page 12 Simplified Illustration of Operation of System Controller VC-SC1000M SET+AUTOPAN+N+ENTER SET TILT SPEED(N=0~255) SET PAN SPEED(N=0~255) SET+SET+AUTOPAN+N+ENTER (MUST SET PAN_SPEED FIRST THEN TILT_SPEED) CAM+ON CAMERA ON CAM+OFF CAMERA OFF ON+AUTOPAN AUTO SCAN OFF+AUTOPAN MANUAL SCAN 1. One who has authority of management can set up.
- Page 13 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operating Keys for DVR of VC Keys of the controller Usage Display CLOSE/DEL Delete Record RECORD Play PLAYBACK Set up SETUP SHOT Back up BACKUP NEAR Format PIC_FORMAT Switching PIC_LOOP...
- Page 14 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operating Keys for DVR of HIK Keys of the controller Usage Display Joystick UP Joystick DOWN Down DOWN Joystick LEFT Left LEFT Joystick RIGHT Right RIGHT AUTOPAN Editing EDIT PREV...
- Page 15 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operating Keys for Multiplexer of ROBOT Keys of the controller Usage Display DOWN Down DOWN LEFT Decrease RIGHT Increase ENTER Acknowledgement ENTER CLEAR Exit EXIT Menu MENU Picture in picture...
- Page 16 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operating Keys for Intelligent Dome Camera of SAMSUNG Keys of the controller Usage 0+ENTER 1+ENTER 2+ENTER 3+ENTER 4+ENTER 5+ENTER 6+ENTER 7+ENTER 8+ENTER 9+ENTER ON+GRP SCAN_START OFF+GRP SCAN_STOP 13)* ON+SET MENU_ON...
- Page 17 Simplified Illustration of Operation of System Controller VC-SC1000M Description of Operating Keys for Intelligent Dome Camera of PANASONIC Keys of the Usage Function controller PRESET 1 CALL PRESET 2 CALL ～ SHOT+N+ENTER PRESET CALL PRESET 63 CALL PRESET 64 CALL...
- Page 18 Simplified Illustration of Operation of System Controller VC-SC1000M 9+ON+SET AREA TITLE NESW 9+ON_SHOT AREA TITLE USER AREA TITLE 9+OFF AREA TITLE OFF 10+ON EL-ZOOM EL-ZOOM 10+OFF EL-ZOOM 11+ON REFRESH REFRESH PRESET1 SET PRESET2 SET ～ SET+N+ENTER PRESET STORE PRESET63 SET...
- Page 19 Simplified Illustration of Operation of System Controller VC-SC1000M 0+AUX+OFF AUX ALL OFF 1+AUX+ON AUX 1 ON 1+AUX+OFF AUX 1 OFF 2+AUX+ON AUX 2 ON 2+AUX+OFF AUX 2 OFF 1+AUX+SHOT AUX 1 MOMENTARY 1+AUX+SET AUX 1 LATCH 2+AUX+SHOT AUX 2 MOMENTARY...
- Page 20 Installations- und Betriebsanleitung Your local distributor All contents of this document may change without prior notice All rights are reserved. Änderungen in Technik, Design und Ausstattung vorbehalten MO_14511-K...