Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Air Live SB-101
- Page 1 SB-101 Panic Button User Manual...
- Page 2 This product contains some codes from GPL. In compliance with GPL agreement, AirLive will publish the GPL codes on our website. Please go to www.airlive.com and go to the "Support->GPL" menu to download source code. All Trademarks are properties of their respective holders. AirLive SB-101 User Manual...
- Page 3 Copyright and Disclaimer FCC ID: ODMSB101 FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-
Page 4: Table Of Contents
1.5 Activate the power ................4 1.6 Over The Air (OTA) Firmware Update ..........5 1.7 Security Network ................5 1.8 Z-Wave Configuration Settings ............5 1.9 Z-Wave Supported Command Class ..........6 1.10 Specifications ................... 7 AirLive SB-101 User Manual... -
Page 6: Overview
1. Overview Overview The Remote SB-101 is a simple control can control AV device through Z- Wave-to-IR extender based on Z-WaveTM technology. It is the Z-Wave plus product, it support the security, OTA. Those newest features of the Z-Wave technology. Z- Z-Wave... -
Page 7: Add To Z-Wave Tm Network
2. Hold down the central key, then press the top-right key three times within 1.5 seconds to enter the association mode. Association Note: SB-101 supports 3 groups. The group 1 is for receiving the report message. Group 2, 3 are for lighting group control. Each group supports 4 nodes. -
Page 8: Function Control
1.2 Function Control Remote SB-101 can control AV device via Z-Wave-to-IR extender and lighting groups ON/OFF. SB-101 has three keys on the device. The central one has panic function and the others are control keys. 1.2.1. AV Control The left key controls Volume Up(0x0003) and the right key controls Volume Down(0x0002) -
Page 9: Z-Wave Tm Message Report
LED will flash once after pressing. Please charge the device through micro USB immediately. 1.5.2. NWI When the device is activated, the device will check is it already adding to the network? If AirLive SB-101 User Manual... -
Page 10: Over The Air (Ota) Firmware Update
The configuration mark with star(*), means after the remove the setting still keep, don't reset to factory default. Unless the user execute the “RESET” procedure. The reserve bit or not supported bit is allowed any value, but no effect. NO. Name Def. Valid Description AirLive SB-101 User Manual... -
Page 11: Z-Wave Supported Command Class
Group 3 Basic Set Level 0 means using the value of configuration 2 to set. 1.9 Z-Wave Supported Command Class COMMAND_CLASS_ZWAVEPLUS_INFO_V2 COMMAND_CLASS_BATTERY COMMAND_CLASS_NOTIFICATION_V4 COMMAND_CLASS_ASSOCIATION_V2 COMMAND_CLASS_CONFIGURATION COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2 COMMAND_CLASS_VERSION_V2 COMMAND_CLASS_WAKE_UP_V2 COMMAND_CLASS_ASSOCIATION_GRP_INFO COMMAND_CLASS_POWERLEVEL COMMAND_CLASS_DEVICE_RESET_LOCALLY COMMAND_CLASS_SECURITY COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2 COMMAND_CLASS_MARK COMMAND_CLASS_BASIC COMMAND_CLASS_SIMPLE_AV_CONTROL_V1 AirLive SB-101 User Manual... -
Page 12: Specifications
100 meters outdoor line of sight. Operating Temperature: 0℃ ~ 40℃ For indoor use only. Specifications subject to change without notice due to continuing product improvement. OvisLink Corp., http://www.airlive.com/ TEL: +886 2 2218 6888 FAX: +886 2 2918 6988 AirLive SB-101 User Manual...
Need help?
Do you have a question about the SB-101 and is the answer not in the manual?
Questions and answers