Table Of Contents - Curtis 700 series Manual

SAFETY INSTRUCTIONS
This instrument was manufactured and tested according to the
applicable technical standards. It complies with all the safety
regulations as shipped from the factory.
Installation and startup must be performed by skilled personnel.
Failure to install and operate the unit in accordance with these
instructions may result in damage or injury.
If safe operation of the instrument can no longer be ensured,
stop and secure it against accidental operation.
If instrument failure or malfunction may cause personal injury
or material damage, use additional safety measures such as
limit switches, guards, etc.
Read the Operating Instructions carefully before startup.
Note the safety instructions marked with this
warning symbol in this manual!

TABLE OF CONTENTS

1. Model Encodement
2. Technical Specifications
2.1 Electrical
2.2 Mechanical
2.3 Environmental
3. Installation
4. Operation
5. Troubleshooting
6. Maintenance
7. Warranty
2
6
10
12
13
14
18
18
19