Electrical Connection - Wolf KG Standard Installation And Maintenance Instructions Manual

Intake/discharge hood

Electrical connection

Making the electrical connection
3040530_201503
Installation information /
Electrical connection
Fit the side sections and top section as shown in the diagram using the screws
provided.
(drip moulding on outside)
In the version with two intake/discharge hoods, one above the other, the upper
hood protrudes over the lower one.
Ensure that the appliance is isolated from the power supply.
Secure against reconnection.
Check that the connecting cables are fitted correctly.
Always install an earth conductor.
Check the earth conductor.
Risk to life through electrocution.
Only use cables that meet the prescribed wiring regulations with regard to
voltage, current, insulation material, load, etc.
Ensure that there is sufficient protection against contact.
Before working on an electrical connection, the mains connections and PE
must be short circuited.
Check whether the data on the type plate corresponds to the connection data.
Before connecting the unit, ensure that the mains voltage corresponds to the
fan voltage.
Only use cables that are designed for the intensity of current according to the
type plate.
Screws
Upper
section
Side sections
Protrusion
11