Wolf AHU TE Installation And Maintenance Instructions Manual page 14

Roof
14
Installation instructions
The weatherproofed AHUW TE version always has a fully installed roof made of zinc-
plated sheet steel.
Split units are delivered to site with the roof sections prefitted to the individual sections.
If the interface at which two units are split does not line up with the pitch of the roof
sections, the requisite single roof section is supplied loose and must be installed on site
once the air-handling unit has been assembled and installed. The requisite fasteners
and sealing materials are supplied with the appliance.
The lifting eyes can remain in the unit as sealed in the factory.
Note Use a plastic-headed mallet to tap the cover strip into place.
Pack space of sealing strip with sealing compound
The roofs of the weatherproof appliances can be stepped on for assembly. Attention
must be paid here to the area distribution of the load (boards).
No static point loads may be applied to the roofs.
AHU TE
AHUW TE
3064058_201610