BW 1019 Installation Instructions Manual

<THESE INSTRUCTIONS MUST BE GIVEN TO THE END USER>
Turnoverball Gooseneck Hitch Installation Instructions
®
MODEL 1019
2019 CHEVROLET/GMC 1500 Crew Cab Short Box (5'8")
Excludes 2019 Chevy LD & GMC Limited.
(call B&W for details concerning other bed sizes.)

Mounting Kit Box (GNRM1019)

ITEM DESCRIPTION
1 Driver Side Plate
2 Passenger Side Plate
3 Rear Cross Member
4 Front Cross Member
5 1/2" X 5−1/2" X 4−1/4" U−Bolt
Fish Wire
Mounting Kit Bolt Bag
ITEM DESCRIPTION
6 1/2" Retainer
7 1/2" Frame Bushing
8 1/2" Locking Strap
1/2" X 1−1/2" Carriage Bolt
1/2" X 1−1/2 Cap Screw
1/2" Finish Nut
1/2" Lock Washer
1/2" Flat Washer
O−Ring
WARNING
Read all installation and operating instructions along with all labels
before using this product.
Adding components such as a Turnoverball hitch to the chassis of
any vehicle can be hazardous. There is potential for unexpected
combustion of fuel, electric shock, burns, shifting or falling of
unstable vehicle, damage to vehicle, injury from tool usage and
many other hazards. This installation must be completed by
someone who is aware of the hazards involved. This person must
be knowledgeable of proper safety procedures for a vehicle
modification of this nature, and for usage of the equipment
required to perform the installation.
Without proper knowledge, towing can be a dangerous activity.
Understand all the risks involved with towing before proceeding.
For information on towing safety, see "The Trailer Handbook: A
Guide to Understanding Trailer and Towing Safety" from the
National Association of Trailer Manufacturers, www.NATM.com
and your trailer manufacturer's owner's manual.
Do not exceed tow or tongue rating of coupler, tow or tongue
rating of hitch, or tow or weight ratings of truck or trailer. See
vehicle and trailer manufacturer information for ratings. Exceeding
these ratings may cause damage to towing components or loss of
attachment between the trailer and truck.
B&W Trailer Hitches
1216 Hawaii Rd / PO Box 186
Humboldt, KS 66748
P:800.248.6564
F:620.869.9031
QTY
1
1
1
1
2
1
2
11
QTY
2
2
2
2
12
12
18
14
1
Failure to comply with the safety information in these
instructions could result in serious injury or death.
See Limited Lifetime Warranty at
bwtrailerhitches.com/warranty
12
10
12
4
9
5
Center Box (GNRC919)
ITEM DESCRIPTION
9 Center Section
10 2−5/16" Ball
11 Latch Pin Handle
Additional caution must be used when towing a wedge car trailer.
Towing stability greatly depends on keeping the center of gravity
as low as possible. Load heavy cars over the axles. Never tow
with a single car on the front of the trailer. When towing a wedge
car trailer, never exceed speeds that are reasonable for the
roadway conditions (e.g. turns, going around a curve, etc.). Failure
to account for proper trailer center of gravity and speeds that are
reasonable for the roadway conditions may cause damage to the
truck, trailer, towing components, and loss of attachment between
the truck and trailer.
This product was designed to fit vehicles in their original, "as
manufactured" condition. Compatibility with vehicles having
replacement parts, or other modifications is not guaranteed.
Inspect vehicle for modifications before installation of this product.
The Turnoverball hitch comes equipped with a 2−5/16" ball.
Trailers towed with the ball provided must have a 2−5/16" coupler.
Towing with a larger coupler could cause loss of attachment
between the trailer and the tow vehicle.
Do not modify this product in any manner. Doing so could alter its
integrity and lead to a loss of attachment between the trailer and
the tow vehicle.
Call or Email us for
Installation Support
hitches@turnoverball.com
bwtrailerhitches.com
5
3
13
14
Safety Chain Kit Bolt Bag
ITEM DESCRIPTION
12
1/2" U−Bolt
13
Conical Springs
QTY 14 1/2" Lock Nut
1 5/16" X 3/4" Carriage Bolt
1 5/16" X 3/4" Cap Screw
1 5/16" Lock Nut
2
6
7
8
QTY
2
4
4
1
1
1
PAGE 1 of 7