How To Use; Power Switch; Carry Handle - Sanitaire SC2800 Series Owner's Manual

Commercial wet/dry vacuum cleaner
Table of Contents

Advertisement

HOW TO USE

Dry Pick Up
To vacuum dry material, use the end of the hose or attach the floor nozzle without the
squeegee.
Wet Pick Up
To vacuum liquids, use the floor nozzle with the squeegee. The filter should be clean for
maximum efficiency.
Attach Hose Coupling
Push the hose coupling into the
hose inlet.
Give a slight twist to secure.
Connect Electric Plug
Place electric plug into outlet.

Power Switch

The power switch is opposite the hose inlet.
Wear ear protection (not provided) if operating the
cleaner for a prolonged period of time.
Push power switch to turn on.

Carry Handle

CAUTION:
Do Not carry wet or dry vacuum by the
lid.
Carry handles are part of the tank.
Always use these handles when lifting the cleaner.
Blower
NOTE:
Clean the hose, tank and tools before using the blower.
Always wear safety goggles. Goggles are not sold with the cleaner.
We recommend ear protection if using the cleaner for a long time.
Never point blower toward people, animals or objects. The flying debris
can cause injury or damage.
Do Not use the cleaner to power a paint sprayer or to supply air to any
other sprayer.
How To Use The Blower On The Lid
Place hose coupling into blower outlet.
8
Hose Coupling
Carry
Handle
Blower
Outlet
Hose
Inlet
Power
Switch
Hose
Coupling

Advertisement

Table of Contents
loading

Table of Contents