1. Manuals
  2. Brands
  3. Brandoo Team Manuals
  4. DVR
  5. BD-323HD
  6. Operation manual

Brandoo Team BD-323HD Operation Manual

2ch 1080p+2ch 1080n mobile dvr
Hide thumbs
Table of Contents

Advertisement

Quick Links

2CH 1080P+2CH 1080N
Mobile DVR Operation manual
Content
FAQ----------------------------------------------------------------------------------------------------------2
DVR instruction------------------------------------------------------------------------------------------3
Power connection---------------------------------------------------------------------------------------5
Remote controller --------------------------------------------------------------------------------------8
Login and password------------------------------------------------------------------------------------9
DVR settings----------------------------------------------------------------------------------------------10
Record settings-------------------------------------------------------------------------------------------14
Network settings------------------------------------------------------------------------------------------16
Alarm settings---------------------------------------------------------------------------------------------20
Motion detection------------------------------------------------------------------------------------------22
Search recorded video----------------------------------------------------------------------------------25
Format--------------------------------------------------------------------------------------------------------26
Upgrade-------------------------------------------------------------------------------------------------------27
DVR parameter----------------------------------------------------------------------------------------------31
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BD-323HD and is the answer not in the manual?

Questions and answers

Summary of Contents for Brandoo Team BD-323HD

  • Page 1: Table Of Contents

    2CH 1080P+2CH 1080N Mobile DVR Operation manual Content FAQ----------------------------------------------------------------------------------------------------------2 DVR instruction------------------------------------------------------------------------------------------3 Power connection---------------------------------------------------------------------------------------5 Remote controller --------------------------------------------------------------------------------------8 Login and password------------------------------------------------------------------------------------9 DVR settings----------------------------------------------------------------------------------------------10 Record settings-------------------------------------------------------------------------------------------14 Network settings------------------------------------------------------------------------------------------16 Alarm settings---------------------------------------------------------------------------------------------20 Motion detection------------------------------------------------------------------------------------------22 Search recorded video----------------------------------------------------------------------------------25 Format--------------------------------------------------------------------------------------------------------26 Upgrade-------------------------------------------------------------------------------------------------------27 DVR parameter----------------------------------------------------------------------------------------------31...

  • Page 2: Faq

    F.A.Q.: 1. Why the DVR just show 2 cameras when I connect 4 cameras with it? A.: This DVR works in 4 modes with cameras. If DVR in 1080P+analog type or 1080P+720P type, but you connect with 4pcs same type camera, the DVR will show 2 channel video only. 2.
  • Page 3 1. About DVR It is a HD CAR DVR designed for taxies, buses, mini vans, trucks and ships surveillance. The highest resolution support 2CH 1080P+2CH 1080N, memory cost about 7GB-8GB per hour. DVR works with 2.0mp/960p/1.3mp AHD CAMERA and also analog cameras. 3G/4G/GPS function optional.
  • Page 4 1.2 Rear panel Interface Name Instruction Power POWER Power input interface, support DC 10-36V AVOUT Video output Always connect with monitor or TV AV1-4 AV1,AV2,AV3,AV4 Connect with Camera HDMI HDMI Support HDMI/VGA video output. High/low signal input to trigger recording or IN1,IN2,IN3,IN4 full screen GND,5V,RX,TX...

  • Page 5: 1.3 Power Connection

    1.3 Power connection Red: Positive Black: Negative (GND) Yellow: Ignition WIRE(ACC). Tips: For testing in with a stable power source, RED+YELLOW connect with positive, and BLACK connect with negative will start DVR. NOTES： 1）Please verify battery voltage before connecting with battery. DVR support 8V-36V power input. DVR will be damaged if power input over 36V.

  • Page 6: Remote Controller

    1.4 Packing list Packing list: 4CH MDVR: 1pcs IR remote controller: 1pcs Key: 2pcs Alarm cable: 1pcs...
  • Page 7 1.5 Video cable: pins instruction Video Audio SD memory installation Please use original SD card, Recommend brand Kinstone, class 10, high speed, max. support 2pcs 128GB SD cards. 1.7 DVR lock and keys DVR will not working properly if DVR unlocked. When you testing or using DVR, please make sure the LOCK is on, otherwise DVR will not start.
  • Page 8 1.8 Remote control instruction Keys Function Startup/power off Power off/on DVR LOGIN Login into main menu 0-9 number keys Type numbers into system, menu or login password Switch between 1-channel and 4-channel version. Press it, show 4-channel. Press digit key 1,2,3,4, Digit keys1,2,3,4 can separately switch to CH1,CH2,CH3,CH4 “＋”...
  • Page 9 2. DVR operation 2.1 Login In preview mode, press “LOGIN” key, type default password “111111” to login. Note: Default password is 111111, please remember if you set up a new password. If you lost it, please contact your supplier for a reset password file. After login, below is main menu...
  • Page 10 2.2 System set up 2.2.1 Base Instruction： 1. Press direction key to move to the item you want to set up, and type in correct data. 2. Press “cancel” key to delete the wrong data 3. DEV ID is used for 3G/4G function. If you have your own server, you can set up this ID by yourself, otherwise, please contact your supplier for this number.
  • Page 11 2.2.2 Video Screen Split: Set up the video output type as 4 screens, 3 screens, 2 screens or H screens. Full Port: You can choose a channel to full screen when DVR power on. Output mode: choose the proper video output mode as CVBS or HDMI. Video Mode: Pal or NTSC optional.
  • Page 12 2.2.3 Power Setting Instruction： 1. Power Mode: ACC/Time/Alarm (signal input and motion detection) modes optional. Press “OK” key to switch different modes. 2. Delay Down: set DVR delay power off or not. The max. delay off time is 1440 minutes (24 hours) *Attention: this function will cost your car battery after your car parked.
  • Page 13 2.2.4 Password Set up new pass word here. The default password is 111111...

  • Page 14: Record Settings

    2.3 Record setting 2.3.1 Base setting Record Mode: Support ACC, TIME, and Alarm modes to start DVR 1. Acc: Start by car ignition signal input. 2. Time: Start and stop by time. 3. Alarm: Start by high/low level signal input or motion detected. Prerecord time: Support 0-10 seconds video prerecording.
  • Page 15 2.3.2 Channel setting This menu is going to set DVR each channels in different function and data. Enable: set the channel recording or not. Resolution: CIF/D1/960H/720P/1080N/1080P optional. Higher resolution cost more memory. Image: Video quality value. The higher value for better video quality, and cost more memory. Audio: set the channel recording audio or not.

  • Page 16: Network Settings

    2.3.3 Time This function is set up schedule recording. 2.4 Network setting 2.4.1 Server CMS—IP: this is MDVR supplier’s server for remote view testing. If you build up your own server, please type your server address and port number here. JT808, this is special function for China market only.
  • Page 17 2.4.2 Stream When users watching live video on computer/mobile phone, you can set up the video quality by here. Resolution: Support 720P/D1/CIF format, the higher resolution will cost higher traffic and it may make the live video jerky. Frame: The value range from 1-15, higher frame makes video smoother. Audio: You can hear sounds on CMS platform when it set Open.
  • Page 18 2.4.3 Mobile This menu is set up the 3G/4G data for your SIM card. Auto: You can choose Auto or Manual. Normally, 4G function no need set up this, when you using 3G function, you may need to set up below items, so please choose “Manual”...
  • Page 19 2.4.4 LAN: (Unavailable for this model) 2.4.5 WIFI: (Unavailable for this model) 2.4.6 FTP (Unavailable for this model)
  • Page 20 2.5 ALARM 2.5.1 IO Instruction: 1. Name: There are several different conditions you can choose as the camera position or action during car running. 2. Trigger DVR by High/Low level High level: signal higher than 4V. Low level: signal lower than 4V. 3.
  • Page 21 2.5.2 Speed sensor (Unavailable for this model) 2.5.3 Temperature sensor (Unavailable for this model)
  • Page 22 2.5.4 Motion Set each channel motion detection functions. Enable： Set up motion detection function on or off on this channel. Sensitivity: Set up motion sensitivity. 5 levels optional. When you set it on highest level, the DVR will be triggered by motion very easily. Record: Set up DVR record or not when motion detected.

  • Page 23: Motion Detection

    How to set up motion detection working A. Motion detection area decided by 2 points. press “+” to set first point as start. point and then press “-” to set the B. And then, click the direction key to move the icon to the 2 motion detecting area.
  • Page 24 C. After this, the final detection area had been set. And once there are movement happened in this red area, DVR will be triggered. D. Power off DVR, and reboot it. (Unavailable for this model) 2.5.5 VLOSS 2.5.6 OIL (Unavailable for this model)
  • Page 25 2.6 Video Instruction： 1． Prev. and Next: press these 2 icons to switch to previous or next month. 2． Type: Search record video type. You can search “alarm” video by here 3． Disk: Select the disk you want to search the video. 4．...
  • Page 26 2.7 Tools 2.7.1 Disk Format: After DVR read disk, click format to clear all data in disk. Attention: All data will be delete and can not get back after disk formatted. Warning 1: Set DVR restart or not when DVR can’t find any disk or disk error. Warning 2: When DVR works with Hard disk, Hard disk will be the primary disk, and SD card will be the back up disk.
  • Page 27 2.7.2 Config Export: Export DVR current settings to disk. Import: Import a config. File from disk for fast set up DVR. Restore factory base config: Apart of DVR data will reset to default. Restore factory all config.: All DVR data will reset to default. 2.7.3 Upgrade- DVR will detect update file automatically.
  • Page 28 2.7.4 Logo Users customize private logo on start screen when DVR power up. The customize logo file should be 720x576, format PNG. Instruction: 1. Copy the picture into SD card and insert to DVR. 2. Power on DVR, and enter menu here. 3.
  • Page 29 2.8 ACCESS 2.8.1 PTZ (Unavailable for this model) 2.8.2 SERIAL (Unavailable for this model)
  • Page 30 2.9 INFO Press “info” key on remote controller to check DVR detail information 3.Playback on Player You can find the player installation file from CD in packing box, or you can ask your supplier to get the latest version player.

  • Page 31: Format

    DVR parameter: Items Parameters Specifications Language Chinese/English/Russian System Operation Menu Graphical User interface（OSD menu） Password Administrator Password Video input 4-CH video input 1.0Vp-p，75Ω 1080P: 1920X1080 1080N: 960X1080 Resolution 720P: 1080x720 960H: 960x576 704X576 CIF: 352X288 Video Video output CVBS/VGA/HDMI Video Display 1 channel or synchronous 4 channels Video Signal PAL/NTSC optional...
  • Page 32 MDVR Electrical parameter Items Parameters Specifications ＋10V--＋36V, When long-term under 10V, or long-term 10—36V Power input over 36V, Auto power off, enter protected mode. 12V(+/-0.2V)，Max:2A. Power output ≤4V Vehicle key ≥5V signal Video input 75Ω 75Ω for each video input impedance impedance Video output Input 2Vp-p CVBS analog signal, reveal device input...

Table of Contents