WebGate SDI2HD Instruction Manual

The World's first certified by
HDcctv Alliance
Instruction Manual
CVBS to HD-SDI
Converter
※ Please read instruction manual carefully before
installing or using this product.
FEATURES
1. Convert NTSC/PAL CVBS input signal into Full-HD size
HD-SDI output signal.
2. Max. 6channel NTSC/PAL CVBS signal inputs support.
3. Output image ratio can be selectable between 4:3 and
16:9.
4. Output image mode can be selected in 1/4/6 screen
mode.
PART NAME AND FUNCTION
① NTSC/PAL CVBS
①
Input 1~6
② HD-SDI Out
②
③ ④⑤
③ Mode Select Switch
④ Power LED
⑤ Power Input
LED Status
RED LED : It turns on with Power
HOW TO CONNECT DEVICE
CVBS
CVBS to HD-SDI Converter
HD-SDI
_
+
HD DVR
1. Connect NTSC/PAL camera to CVBS video input using
BNC cable.
2. Connect HD-SDI out with HD-SDI input of DVR using
HD-SDI customized cable.
DIMENSION
121
CVBS
CVBS to HD-SDI Converter
HD-SDI
143
33
WEBGATE Div. Daemyung Enterprise Co., Ltd.
6F, Hanlim Venture Town B/D, 689-6, Geumjeong-Dong
Gunpo-Si, Gyeonggi-do, Korea
TEL : +82-31-428-9300
FAX : +82-31-428-9400
sales@webgateinc.com
support@webgateinc.com
www.webgateinc.com
Premium to your HD-CCTV solution
ENG Rev 1.1
VIDEO INPUT / OUTPUT
Input
Support 1~6 channel NTSC/PAL CVBS inputs and 1/4/6
channel input can be used based on display output mode.
Output
Support 1080p(1920*1080) HD-SDI signal output.
※ HD-SDI customized coax cable is recommended.
Setup video mode
NTSC
P A L
Mode selection switch consists of 4.
1. Input mode setup
(1) Select NTSC mode : Select when input is NTSC.
Output HD-SDI is in 1080p30.
(2) Select PAL mode : Select when input is PAL.
Output HD-SDI is in 1080p25.
2. Output screen division model setup
(1) Select 口 : 1 screen division (No.1 channel output).
(2) Select 田 : 4 screen division (No.1~4 channel output).
(3) Select both (口) and (田) or none of them selected :
6 screen division (No.1~6 channel output).
CAUTION IN POWER CONNECTION
When connecting power to converter, connect adaptor to
converter first and then connect power cord to adaptor.
If connecting power cord first, the risk of electric shock
or equipment damage can occur.
When connecting adaptor to converter, if + / - ports are
mismatched, equipment can be damaged.
(size:mm)
Power Adapter
(Option)
3. Output screen ratio setup
(1) Select 4:3 : NTSC/PAL output as a 4:3 screen ratio.
There will be space in output image.
(2) Select 16:9 : Image output with expanded ratio.
There is no space in output image.
CAUTION FOR CABLE / CONNECTOR
The impedance of the coaxial cable and BNC connectors
must be used with a 75 Ohm.
HD-SDI maximum transmission distance depends on the
cable manufacturer or installation environment.
For user reference, please, refer to the below cable
recommendation.
16:9
4 : 3
Cable type
5C2V
4C-FB(T), 4C-HFB(T),
RG59
5C-FB(T), 5C-HFB(T),
L-6CHD, RG6
Note) When selecting the cable, distance difference
depends on attenuation of 750MHz.
(dB/100m <25dB of attenuation is recommended.)
Note) Expansion foam or High-expansion foam insulation
cable is recommended.
Note) 2 or 3 of the shielded cable is recommended.
SPECIFICATION
Model
Specifications
Video input
Video output
Video output resolution 1080p30/25
Indication LED
HD-SDI Out
PWR DV12V
Mode switch
Mode
NTSC 16:9
P A L 4:3
Input voltage
Power consumption
Operating
+
temperature/humidity
-
Dimension (W x D x H)
Weight
DC12V
Certifications
Length of
Details for usage
HD-SDI
About
Analogue video cable
100M
High-expansion foam cable,
About
2 or 3 of the shield is
150M
recommended
About
HD-SDI customized cable
200M
SD2HD
6CH (NTSC/PAL)
1CH (HD-SDI SMPTE 292M)
Power LED(Red)
Mode select
SW1 : NTSC/PAL select
SW2 : 1CH Mode select
SW3 : 4CH Mode select
SW4 : 16:9/4:3 Mode select
12 VDC
Max 5W
+0°C to +50°C / 20%RH to 80%RH
143 x 121 x 33 mm
Approx. 320g
KC, FCC, CE, RoHS