Table of Contents
Advertisement
Security
Your phone provides many security options, including a
user-programmable lock code and call restriction
features.
To access the security menu, you need to enter a four-
digit lock code. The lock code is preset to "0000" at the
factory.
Lock phone
In Lock mode, you cannot dial number, except for making
an emergency call, or accessing menu options. You can
receive incoming calls and messages, even though the
phone is locked.
The following options are available:
Unlocked: the phone remains unlocked.
On power-up: the phone locks automatically the next
time you turn the phone on.
Lock now: the phone locks immediately.
To place an emergency call, enter the number and then
press
. The phone recognizes standard emergency
number, and three emergency numbers saved via the
Emergency # menu option (Menu 8-4); see page 99.
To unlock the phone, press
90
Menu 8-1
and enter the lock code.
Change lock
You can change your current lock code to a new one.
The lock code is preset to "0000" at the factory.
Enter a new four-digit lock code, and your phone
prompts you to enter the code again. Re-enter the lock
code. The phone saves the new code and automatically
returns to Standby mode.
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write the
lock code down or memorize it if you have
changed.
Restriction
This feature allows you to restrict all your outgoing
calls. You cannot make any call, except for emergency
calls (see below).
Select Yes to use the call restriction feature or No to
release the feature.
Emergency #
Your phone provides the option of storing emergency
numbers. These numbers can be manually dialed at any
time, even though your phone is locked or all outgoing
calls are restricted. You can store up to three emergency
numbers.
S S e e c c u u r r i i t t y y
Menu 8-2
Menu 8-3
Menu 8-4
91
Advertisement
Table of Contents
