Subscribe to Our Youtube Channel
Summary of Contents for Total Control QPI-PSL-201
- Page 1 Bus Conversion Unit 10.5” & 12.1” QuickPanel Ethernet Series Installation Guide Bus Conversion Installation Guide GFK-2073...
- Page 2 Information in this document is subject to change without notice and does not represent a commitment on the part of Total Control Products, Inc. The software described in this document is provided under a license agreement. The software may be used or copied only under the terms of the agreement. Only one copy of the software may be made for a backup.
- Page 3 (for 10.5" & 12.1" QP-Ethernet Series Units) Thank you for purchasing Total Control Products' Bus Conversion Unit (QPI-PSL-201), hereafter referred to as the "Unit". This Unit allows the attachment of QPI-xxx-20x series expansion units to 10.5" and 12.1" QP-Ethernet Series units.
-
Page 4: Safety Precautions
Safety Precautions This guide includes information that must be followed to ensure the correct and safe use of this product. Be sure to read both this guide and any related manuals to thoroughly understand the correct operation and functions of both the Bus Conversion Unit and the 10.5"... -
Page 5: Ce Marking Notes
UL/c-UL (CSA) Application Notes The QPI-PSL-201 (Model #2980020-02) is a UL/c-UL listed product. (UL file No.E182139) This unit conforms as a product to the following standards: UL508 Industrial Control Equipment UL1604 Electrical Equipment for use in Class I and II, Division 2, and Class III Hazardous (Classified) Locations. -
Page 6: Package Contents
The following items are included in the Unit's package. Prior to using the Unit, be sure to confirm that all the items shown below are present. Bus Conversion Unit Bus Conversion Unit Installation Guide ( 1 ) ( QPI-PSL-201) ( this document ) Bus Conversion Unit Installation... - Page 7 The figures below show the Bus Conversion Unit and an expansion unit attached to a 10.5" or 12.1" QP-Ethernet Series unit. Unit: mm [in.] 223 [8.78] 8 [0.31] (301 [11.85]) 89 [3.50] 31 [1.26] Left Side Rear...
-
Page 8: Part Name And Function
Part Name and Function The Unit's part name and its function are explained below. Expansion Bus Connector Used to connect QPI-xxx-20x series expansion units. General Specifications Environmental Operating C to 50 Temperature Storage C to +60 Temperature Humidity 10%RH to 90%RH (no condensation) Vibration based on JIS B 3501, IEC61131-2 Resistance... -
Page 9: Installation
Installation Use the following procedures to install the Bus Conversion Unit in a QP-Ethernet Series unit. WARNINGS Prior to installing this Unit: • When attaching this unit to the QP-Ethernet Series units, make sure that the QP-Ethernet's power cord is not plugged in to the main power (constant), to prevent an electric shock. - Page 10 (included with unit). Attachment Screws Note Please be aware that Total Control Products shall not be held liable by the user for any damages, losses, or third party claims arising from the uses of this product.
Need help?
Do you have a question about the QPI-PSL-201 and is the answer not in the manual?
Questions and answers