Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Norton Clipper CG125
- Page 1 CG125 OPERATING INSTRUCTIONS...
-
Page 4: Important Safety Instructions
Operating Instruction Important Safety Instructions Warning notices Warning of general danger Warning of dangerous voltage Warning of hot surface Danger of being ripped or cut During work you should wear ear protectors, goggles, dust mask, protective gloves and sturdy work clothes! Use ear protection Wear safety goggles Wear a dust mask... - Page 5 Specifications Concrete Grinder CG 125 Rated voltage 230 V Power input 1800 W Frequency: 40 - 60 Hz Rated speed: 10,000 rpm Max. disc diameter: 125 mm Spindle: M 14 Protection class: Degree of protection: IP 20 Net weight: about 5.7 kg Interference suppression: EN 55014 and EN 61000 Content of Delivery...
- Page 6 Safety Instructions Safe work with the machine is only possible if you read this operating instruction and follow the instructions contained strictly. Additionally, the general safety instructions of the leaflet supplied with the tool must be observed. Prior to the first use, the user should absolve a practical training If the mains cable gets damaged or cut during the use, do not touch it, but instantly pull the plug out of the socket.
- Page 7 Let it run idle for about 30 seconds in a safe position. If considerable vibrations occur or if other defects are recognised, switch off immediately. Always lead the mains and extension cable as well as the extraction hose to the back away from the machine. ...
- Page 8 Switching on and off Short-Time Operation Switching-on: press the on/off switch Switching-off: release the on/off switch Permanent Operation Switching-on: press the on/off switch and, keeping it pressed, engage the lock-on button Switching-off: press the on/off switch and release it again Attention! In case of every stop of the machine or a power cut, the lock-on button has to be released immediately by pressing...
- Page 9 First of all, the detachable hood segment has to be removed. The snap fit opens up and the segment is pushed forward. Now you can hold up the driving disc between gearbox and grinding wheel by using a jaw wrench 32 (1).
- Page 10 Instruction for Use Switch the machine on and put it carefully on the surface you want to work on. Hold the tool with both hands and work with circular or linear movements. For best working results: Don’t put too much pressure on the surface you want to work on.
- Page 11 Environmental Protection Raw material recycling instead of waste disposal To avoid damages on transportation, the power tool has to be delivered in a sturdy packing. Packaging as well as unit and accessories are made of recyclable materials and can be disposed accordingly. The tool’s plastic components are marked according to their material, which makes it possible to remove environmental friendly and differentiated because of available collection facilities.
- Page 12 An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
- Page 13 Declaration of Conformity On sole responsibility we declare that this product is in conformity with the following standards and standard documents: EN 50 144, EN 55 014, EN 61 000, IEC 60 745 according to the regulations 2006/95/EC, 89/336/EEC, 98/37/EC Mersch Pierre Business Manager Machines Saint-Gobain Abrasives...
- Page 14 SAINT-GOBAIN ABRASIVES 190,Bd John F. Kennedy L-4930 BASCHARAGE LUXEMBOURG Tel.: ++352 50 401-1 Fax: ++352 50 16 33 e-mail: sales.nlx@saint-gobain.com www.construction.norton.eu 20.10.2009...
Need help?
Do you have a question about the CG125 and is the answer not in the manual?
Questions and answers