Advertisement
***** Please compare the parts in the box with the bill of materials provided *****
to assure that you have all the parts necessary for this installation.
These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read this document com-
pletely before beginning the installation of your system.
To ensure this part number fits your specific model year, please visit our website for the latest model year listings at
Thank you for purchasing a Borla Performance Exhaust Component.
Borla Performance Exhaust Component (PN-60087) is designed for the Chevrolet Corvette C5 equipped with a 5.7L V8 en-
gine, automatic or manual transmissions.
Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the necessary
equipment, tools and experienced personnel needed for proper installation, should perform the installation of this system. However,
if you decide to perform the installation, we recommend someone should help you. Ensure the installer uses all under car safety
precautions including eye protection.
Please take time to read and understand the following...
By installing your Borla Performance Exhaust Component, you indicate that you have read this document and you agree with the
terms stated below.
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your Borla
Performance Exhaust Component.
Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper
operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer's products
and/or systems.
Included with your Borla Performance Exhaust Componentis a warranty card. Please read it carefully before you begin any work on
your vehicle. If you should have any questions regarding our warranty policy, installation, or any other matter pertaining to your new
Borla Performance Exhaust System, please give us a call at the number provided on the warranty card.
INSTALLATION INSTRUCTIONS
Chevrolet Corvette C5 X-Pipe
X-Pipe Installation for Chevrolet Corvette
PN-60087
DOCUMENT PART NUMBER
A-35679 Rev. C
BORLA PERFORMANCE INDUSTRIES
500 Borla Drive
Johnson City TN, 37604-7523
805-986-8600
www.BORLA.com
PAGE
1 of 4
Advertisement
Table of Contents
Related Manuals for BORLA 60087
Summary of Contents for BORLA 60087
- Page 1 These instructions have been written to help you with the installation of your Borla Performance Exhaust System. Please read this document com- pletely before beginning the installation of your system.
- Page 2 2. 3/8” Drive Extension 3” 3. 15mm Deep Well Socket 4. 13mm Socket 5. Metal-Cutting-blade Saw 6. Pry Bar SHOP SUPPLIES: 1 Spray Lubricant Borla Performance - Bill of Materials 60087 INSTALLATION INSTRUCTIONS DOCUMENT PART NUMBER PAGE Chevrolet Corvette C5 X-Pipe A-35679 Rev. C...
- Page 3 WARNING: Use extreme caution during installation. Torque all fasteners according to manufactur- er’s torque values and tightening sequence. DO NOT use air impact tools to tighten fasteners on Borla Performance Exhaust Systems. Use of such tools may result in bent flanges or gasket contact areas leading to exhaust leaks.
- Page 4 NOTE: When you first start your vehicle after the installation of your new Borla Performance Exhaust System, there may be some smoke and fumes coming from the system. This is a protective oil based coat- ing used in the manufacturing of mandrel bent performance exhaust tubing.
Need help?
Do you have a question about the 60087 and is the answer not in the manual?
Questions and answers