Table of Contents
Advertisement
8.4 Attaching the seal to the
rabbet
1. Clean the rabbets in the worktop.
2. Cut the supplied seal stripe into 4
stripes. The stripes must have the
same length as the rabbets.
3. Cut the ends of the stripes at an angle
of 45°. They should fit in the corners
of the rabbets accurately.
8.5 Assembly
min.
500mm
A
< 20 mm
min. 500 mm
A
B
12 mm
57 mm
28 mm
41 mm
38 mm
31 mm
min.
50mm
min.
2mm
min. 2 mm
B
min
30 mm
4. Attach the stripes to the rabbets. Do
not extend the stripes. Do not bond
ends of stripes one over another.
After you assemble the hob, seal the
remaining gap between glass ceramic and
the worktop with silicone. Make sure the
silicone does not get under the glass
ceramic.
A
> 20 mm
min. 500 mm
A
B
12 mm
57 mm
28 mm
41 mm
38 mm
31 mm
ENGLISH
min. 2 mm
B
17
Advertisement
Table of Contents
