1. Manuals
  2. Brands
  3. Lex Computech Manuals
  4. Single board computers
  5. CI170A
  6. User manual

Lex Computech CI170A User Manual

Intel kaby lake-s / skylake-s core i processor + intel q170, ddr4 2133 mt/s / lan / dvi / hdmi / dp / usb / pcie mini card
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CI170A / CI170C
Intel ® Kaby Lake-S / Skylake-S Core™
I processor + Intel Q170,
DDR4 2133 MT/s / LAN / DVI / HDMI / DP
/ USB / PCIe mini card
All-In-One
6th / 7th gen. Intel Kaby Lake-S / Skylake-S Core™ I CPU
DVI, HDMI, LVDS, DP, LVDS (eDP), PCIe mini card
Multi-COM Board, Audio, LAN, SATA, USB
NO. CI170A/C
Release date: April 28th 2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CI170A and is the answer not in the manual?

Questions and answers

Related Manuals for Lex Computech CI170A

  • Single board computers Lex Computech 3I380A User Manual
    Single board computers Lex Computech 3I380A User Manual
    Intel bay trail-i e3815/e3845 single core/quad core cpu, ddr3l 1066/1333 mt/s, 2 x lan/hdmi/audio/usb/com/pcie mini card, all-in-one intel bay trail-i e3815/e3845 single core 1.46 ghz/quad core 1.91 ghz cpu, 2 x intel gbe lan , 2 x pcie mini card slots , (112 pages)

Summary of Contents for Lex Computech CI170A

  • Page 1 CI170A / CI170C Intel ® Kaby Lake-S / Skylake-S Core™ I processor + Intel Q170, DDR4 2133 MT/s / LAN / DVI / HDMI / DP / USB / PCIe mini card All-In-One 6th / 7th gen. Intel Kaby Lake-S / Skylake-S Core™ I CPU...

  • Page 2: Table Of Contents

    1-7 PACKING LIST ........................CHAPTER 2 HARDWARE INSTALLATION ................2-1 UNPACKING PRECAUTION ....................2-2 UNPACKING CHECKUP ...................... 2-3 DIMENSION-CI170A/C ......................2-4 FUNCTION MAP-CI170A/C ....................2-5 CONNECTOR MAP-CI770A/C ..................... 2-6 DIAGRAM-CI770A/C......................2-7 NSTALL MEMORY ....................... 2-8 LIST OF JUMPERS ......................2-9 JUMPER SETTING DESCRIPTION ..................
  • Page 3 3-13 I/O INTERFACE ........................3-14 DIGITAL INPUT / OUTPUT / WATCH DOG TIME .............. 3-8-1 IO DEVICE: F75111 UNDER DOS ..................3-8-2 IO DEVICE: F75111 UNDER WINDOWS ................3-8-3 IO DEVICE: F75111 VB6 UNDER WINDOWS ..............3-8-4 IO DEVICE: F75111 UNDER LINUX .................. 3-15 I C BUS INTERFACE ......................
  • Page 4 4-8 CHIPSET ..........................4-8-1 SYSTEM AGENT (SA) CONFIGURATION ..............4-8-1-2 GRAPHICS CONFIGURATION ..................4-8-1-3 PEG PORT CONFIGURATION ..................4-8-2 PCH-IO CONFIGURATION ....................4-8-2-1 PCI EXPRESS CONFIGURATION ................4-8-2-1-1 PCI EXPRESS ROOT PORT 5/6/7/8 (I210/I211 LAN2/3/4/5) ........4-8-2-2 SATA AND RST CONFIGURATION ................4-9 SECURITY ........................
  • Page 5 Copyright This manual is copyrighted and all rights are reserved. It does not allow any non authorization in copied, photocopied, translated or reproduced to any electronic or machine readable form in whole or in part without prior written consent from the manufacturer.

  • Page 6: Warning

    Warning ! 1. Battery Batteries on board are consumables. The life time of them are not guaranteed. 2. Fless solution with HDD The specifi cation & limitation of HDD should be considered carefully when the fanless solution is implemented. We will not give further notifi cation in case of changes of product information and manual.

  • Page 7: Hardware Notice Guide

    Hardware Notice Guide 1. Before linking power supply with the motherboard, please attach DC-in adapter to the motherboard fi rst. Then plug the adapter power to AC outlet. Always shut down the computer normally before you move the system unit or remove the power supply from the motherboard.
  • Page 8 Photo 1 Insert Unplug...

  • Page 9: Chapter 1 General Information

    Chapter-1 General Information The CI170A/C is an All-In-One board which is 7th/6th Gen Intel® Core™ i7/i5/i3 and Pentium®/Celeron® Processor (formerly codenamed Skylake-S) based industrial motherboard in the LGA1151 package with Intel® Q170 Express chipset. The CI170A/C supports high-speed data transfer interfaces such as PCIe3.0, USB 3.0, and SATA 6 Gb/s (SATA III), with dual-channel DDR4 2133 MHz memory up to 32 GB in two SO-DIMM slots and supports 4 USB 3.0, 5 USB 2.0, 10 COM and 4 SATA III ports, as well as graphics...

  • Page 10: Major Feature

    16. Support TPM 2.0 *6 17. PCB Dimension: 200 x 150 mm *1 & *6 CI170C only *2 CI170A supports 2 LAN ports *3 eDP & LVDS shared the same signal, LVDS for CI170C only *4 CI170A supports 6 COM...

  • Page 11: Specification

    1-2 Specifi cation CPU: Desktop Skylake S-Platform processor. The processor is designed be offered in a LAG1151 package. Memory: Two SO-DIMM slots for DDR4 SDRAM, Max. 32GB, data transfer rates of 1866MT/s and 2133 MT/s Graphics: Intel Desktop Skylake S-Platform Processor Integrated Graphics. GEN 9 architecture supports up to 72 Execution Units (EUs), depending on the processor SKU.

  • Page 12: Installing The Cpu/Pch Heatsink. (Socket Version)

    1-3 Installing the CPU / PCH Heatsink. (Socket Version) 1. Install CPU bracket under the CPU fi rst. 2.1. Locate Pin1 in the socket,look for a golden narrow. 2. Use screw driver and screw the socket 2.2. Lock the CPU socket by securing the screw in anti-clockwise direction.
  • Page 13 3. Peel-off the Elastic Silicone sticker 3.2 Insert the system fan power cable to the pin header (FAN1) on board. under the Heat Sink. 3.1 Tighten the HEAT SINK on the motherboard. Pay attention to tighten the screws diagonally.

  • Page 14: Vertical So-Dimm Assembly Guide

    1-4 Vertical SO-DIMM assembly guide 1. Install the memory into SODIMM. 2. Press down fi rmly to ensure the memory is locked. ------------------------------------------------------------------------------------------------------------------------ Uninstall 1. Pull open both sides of the memory slot. 2. Take out the memory.

  • Page 15: Installing The Mini Pci-E Card

    1-5 Directions for installing the Mini Card 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 16: Directions For Installing The Mini Card

    1-6 Directions for installing the Mini PCI-e Card (Full Size) 1. Unscrew the screw on the board 2. Plug in the Mini Card in a 45 angle 3. Gently push down the Mini Card and screw the screw back.

  • Page 17: Packing List

    1-7 Packing List Material Code Description Detail Specifi cation Quantit 7G1901-1650001-0 MB-CI170C-ACXX-001 LF, CI170C-ACXX, Rev.:001 LF, Intel Baytrail Driver, Windows 6G8006-2349-0100 LEX Product Driver DVD 7/8.1 32/64 6G6001-2203-0100 SATA DATA Cable (Red) LF, L=25cm LF, L=25cm, 6G6003-1009-0100 SATA Power Cable 1*5/2.0 to 180°...

  • Page 18: Chapter 2 Hardware Installation

    Chapter-2 Hardware Installation 2-1 Unpacking Precaution This chapter provides the information how to install the hardware of CI170A/C. Please follow section 1-7, 2-1 and 2-2 to check the delivery package and unpack carefully. Please follow the jumper setting procedure. NOTE! 1.

  • Page 19: Unpacking Checkup

    2-2 Unpacking checkup First of all, please follow all necessary steps of section 2-1 to protect CI170A/C from electricity discharge. With reference to section 1-7 please check the delivery package again with following steps: 1. Unpack the CI170A/C board and keep all packing material, manual and driver disc etc, do not dispose ! 2.

  • Page 20: Dimension-Ci170A/C

    2-3 Dimension-CI170A/C...

  • Page 21: Function Map-Ci170A/C

    2-4 Function MAP-CI170A/C LCD Power DC-IN CPU Socket CPU FAN 4 x SATA System FAN LAN1 Front Panel USB Touch 8 DI/DO SMBUS 5 x USB2.0 Line-out /Line-in/Mic-in +12V/+5V output Audio AMP-L/R COM5~10(RS232/422/485) PCIe/USB Auto Detect/ PS2 KB/MS USB/mSATA LAN 3...

  • Page 22: Connector Map-Ci770A/C

    2-5 Connector MAP-CI170A/C CPP1 CPI1 CL11 LVDS1 EDP1 CPU1 CPI12 JCMOS1 SODIM2 DVI1 SODIM1 HDMI1 CC1&2 FAN2 JVC1 JVC2 JVP1 SATA2 JVL1 JVL2 SATA1 FAN1 CC3&4 SATA4 JVC3 JVC4 SATA3 CFP1 CL4&5 SWP1 CC7 CC8 NGFF1 CC10 CIO2 CUL3 CIO1...

  • Page 23: Diagram-Ci770A/C

    2-6 Diagram-CI170A/C CPP1 CPI1 CL11 LVDS1 EDP1 CPU1 CPI12 JCMOS1 SODIM2 DVI1 SODIM1 HDMI1 CC1&2 FAN2 JVC1 JVC2 JVP1 SATA2 JVL1 JVL2 SATA1 CC3&4 FAN1 SATA4 JVC3 JVC4 SATA3 CL4&5 CFP1 SWP1 CC7 CC8 NGFF1 CC10 CIO2 CUL3 CIO1 CUL2...

  • Page 24: Nstall Memory

    2-7 Install Memory This motherboard provides one 260-pin Small Outline Dual In-line Memory Module (SODIMM) socket for memory expansion available maximum to of 4GB/8GB/16GB DDR4 SDRAM. DDR4 clock supports: DDR4 1866/2133MT/S Valid Memory Confi gurations Total Memory DIMM1 / 2 System Accept or Not Max.

  • Page 25: List Of Jumpers

    2-8 List of Jumpers JCMOS1: CMOS clear select JVC1: COM1 voltage select JVC2: COM2 voltage select JVC3: COM3 voltage select JVC4: COM4 voltage select JVC5: COM5 voltage select JVC6: COM6 voltage select JVC7: COM7 voltage select JVC8: COM8 voltage select JVC9: COM9 voltage select JVC10: COM10 voltage select JVP1: LVDS Panel Inverter power select...

  • Page 26: Jcmos1: Cmos Data Clear

    2-10 JCMOS1: CMOS DATA Clear A battery must be used to retain the motherboard confi guration in CMOS RAM. Close Pin1 and pin 2 of JCMOS1 to store the CMOS data. To clear the CMOS,follow the procedures below: 1. Turn off the system and unplug teh AC power 2.

  • Page 27: Com Port Pin9 Select Ri Signal Or Voltage Source

    2-11 COM port pin9 select RI signal or Voltage source JVC1 : COM1 PIN9 select JVC2 : COM2 PIN9 select JVC3 : COM3 PIN9 select JVC4 : COM4 PIN9 select JVC5 : COM5 PIN9 select JVC6 : COM6 PIN9 select JVC7 : COM7 PIN9 select JVC8 : COM8 PIN9 select JVC9 : COM9 PIN9 select...
  • Page 28 JVC5 JVC9 JVC6 JVC7 JVC8 JVC10 *RI Signal 6 4 2 6 4 2 6 4 2 6 4 2 6 4 2 6 4 2 JVC5 JVC6 JVC7 JVC9 JVC8 JVC10 6 4 2 6 4 2 6 4 2 6 4 2 6 4 2 6 4 2...

  • Page 29: Jvp1: Lvds Panel Inverter Power Select

    2-12 JVP1: LVDS panel Inverter power select JVP1 Description +12V *2-3 Note : Attention ! Check Device Power in spec. JVP1 +12V *+5V 2-13 JVL2: LVDS/eDP panel power select JVL2 Description +3.3V *2-3 Note : Attention ! Check Device Power in spec. JVL2 *+3.3V...

  • Page 30: Chapter 3 Connection

    Chapter-3 Connection This chapter provides all necessary information of the peripheral's connections, switches and indicators. Always power off the board before you install the peripherals. 3-1 List of Connectors CPI1: DC 12V-in DIN external connector (4pin mini din connector) CPI12: DC-in 2x4 pin (2.00mm) Red wafer connector DP1: Display Port HDMI1: HDMI Connector DVI1: DVI Connector...

  • Page 31: Dc 12V-In External Connector

    CO1: I2C 4pin (1.25mm) wafer CC5/CC6/CC7/CC8/CC9/CC10: COM 2x5pin (2.00mm) wafer CKM1: KB/MS port 1x6 pin (1.25mm) wafer connector SODIM1/ SODIM2: SO-DIM DDR4 1.2V DRAM Socket 3-2 DC 12V-IN external Connector CPI1: DC 12V-IN external Connector (4pin mini din connector) PIN NO. Description +12V DC-IN Note: DC in from adapter plug in...

  • Page 32: Battery Input

    3-3 Battery Input BAT1: 3V Battery hold 2pin BAT1: Battery use Li 3V/220mAh (CR2032) BAT1 Note: 1. When board without Adaptor plug in, this board power RTC consumption about 2.7uA 2. If adaptor always plug in RTC power consumption about 0.1uA 3-4 DC Power output CPO1/CPO2: +12V/+5V DC voltage output (1 X 4 pin 2.00mm Black wafer)
  • Page 33 CSP1/CSP2: +5V DC voltage output (Option) PIN NO DESCRIPTION *Note: 1. Mating connector: JST B2B-PH-KL or compatible 2. Cable housing:JST PHR-2 or compatible CSP1 CSP2 pin1 pin1...

  • Page 34: Front Panel & Fan

    3-5 Front panel & FAN CFP1 Front panel wafer (2 X 5 pin 2.0mm wafer) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Power button GND Power button pin Reset GND Reset pin Power LED- Power LED+ HDD LED- HDD LED+ LAN LED- LAN LED+ *Note: 1.

  • Page 35: Fan Connectors

    3-6 FAN connectors FAN1: System FAN Connector (1 X 3 pin 2.54mm wafer) PIN NO. DESCRIPTION +12V FAN speed detect Note: 1. DC in +12V by switch to FAN power +12V, so DC in need stable +12V input 2. Mating connector: MOLEX 7879-3 or compatible 3.

  • Page 36: Display & Touch Interface

    3-7 Display & Touch interface DVI1: DVI-D 12bit connector Up side (DVI Connector) PIN NO. Description PIN NO. Description PIN NO. Description Data 2- Data 1- Data 0- Data 2+ Data 1+ Data 0+ C-CLK C-DATA CLK+ DVI-DETECT CLK- DP1 : Display Port connector down side Description Description Lane 0+...

  • Page 37: Hdmi Interface

    3-8 HDMI interface HDMI1 : HDMI connector down side PIN NO. DESCRIPTION PIN NO. DESCRIPTION TMDS DATA2+ TMDS DATA2- TMDS DATA1+ TMDS DATA1- TMDS DATA0+ TMDS DATA0- TMDS CLK+ TMDS CLK- DDC CLOCK DDC DATA H.P. Detect HDMI HDMI1...

  • Page 38: Edp Interface

    3-9 EDP interface EDP1: eDP interface (2 X 10 pin 1.25mm wafer) PIN NO. DESCRIPTION PIN NO. DESCRIPTION Lane 0- Lane 0+ Lane 1- Lane 1- ENBKL (3.3V) PWM dimming SMB_CLK +LCD (5V or 3.3V) SMB_DATA +LCD (5V or 3.3V) AUX_CH+ +LCD (5V or 3.3V) AUX_CH-...

  • Page 39: Lvds Interface

    3-10 LVDS interface LVDS1: LVDS interface (2x15 pin 1.25mm wafer) PIN NO. Description PIN NO. Description PWM dimming +LCD(5V or 3.3V) +LCD(5V or 3.3V) Channel-1-DATA3+ Channel-0-DATA3+ Channel-1-DATA3- Channel-0-DATA3- Channel-0-DATA2+ Channel-0-CLK+ Channel-0-DATA2- Channel-0-CLK- Channel-0-DATA1+ Channel-0-DATA0+ Channel-0-DATA1- Channel-0-DATA0- +LCD(5V or 3.3V) +LCD(5V or 3.3V) Channel-1-DATA2+ Channel-1-CLK+ Channel-1-DATA2-...

  • Page 40: Panel Inverter Power

    3-10-1 Panel Inverter power CPP1: Panel Inverter power (1 X 5 pin 2.0mm wafer) PIN NO. Description +12V PWM dimming ENBKL (3.3V) ENBKL ( 5V ) Note：1. JVP1 Inverter Voltage select 2. CPP1 PIN 3 and LVDS1 PIN1 is same signal. Default active setup by DPC Control 3.

  • Page 41: Touch Screen Device

    3-11 Touch screen device CT1: Touch screen (2x5 pin 2.0mm wafer) Default use USB interface For 8-wire type pin defi ne PIN NO. Description PIN NO. Description Bottom Bottom Sense Top Sense Right Right Sense Left Left Sense Note：1. For eight wire type cable Pin 3 and Pin4 need short. 2.

  • Page 42: Audio Interface

    pin1 3-12 Audio interface CA1: Line-out/Line-in/Mic-in (2 X 5 pin 2.00mm wafer) PIN NO. Description PIN NO. Description Line-out-R MIC-IN Line-in-R Line-in-L Line-out-L MIC-IN Note: 1. Mating connector: JST B10B-PHDSS or compatible 2. Cable housing: JST PHDR-10VS or compatible pin1...
  • Page 43 CAR1: Audio Amplifi er Line out Right (1 X 2 pin 2.00mm wafer) PIN NO. DESCRIPTION LINE-OUT_R+ LINE-OUT_R- Note: 1. Mating connector: JST B2B-PH-KL or compatible 2. Cable housing: JST PHR-2 or compatible CAL1: Audio Amplifi er Line out Left (1 X 2 pin 2.00mm wafer) PIN NO.

  • Page 44: I/O Interface

    3-13 I/O Interface COM ports COM1/2/4/5/6/7/8/9/10 default support RS232/RS422/RS485 mode RS232 mode ports (D-SUB 9pin) CC1&2: COM1 (up side)/COM2 (down side) port connector CC3&4: COM3 (up side)/COM4 (down side) port connector PIN NO. Description PIN NO. Description RI/Voltage Note: 1. Pin 9 RI and Voltage setting only for COM 1/2/3/4 ports JVC1 for COM1,JVC2 for COM2 , JVC3 for COM3,JVC4 for COM4 2.
  • Page 45 COM3 COM1 COM2 COM4 RS232 mode ports (2 X 5 pin 2.00mm wafer) CC5：COM5 CC6：COM6 CC7：COM7 CC8：COM8 CC9：COM9 CC10：COM10 PIN NO. Description PIN NO. Description RI/Voltage Note: 1. Pin 9 RI and Voltage setting only for COM 5/6/7/8/9/10 ports JVC5 for COM5, JVC6 for COM6, JVC7 for COM7, JVC8 for COM8, JVC9 for COM9, JVC10 for COM10 2.
  • Page 46 RS422 mode ports (2 X 5 pin 2.00mm wafer) CC5：COM5 CC6：COM6 CC7：COM7 CC8：COM8 CC9：COM9 CC10：COM10 PIN NO. Description PIN NO. Description RS422 TX- RS422 TX+ RS422 RX+ RS422 RX- Note: 1. BIOS need setting to RS422 mode 2. Mating connector: JST B10B-PHDSS or compatible 3.

  • Page 47: Digital Input / Output / Watch Dog Time

    3-14 Digital Input / Output / Watch Dog Time CIO1 DIO 0 ~ 3 (2x5pin 2.0mm wafer) PIN NO. Description PIN NO. Description DI-0 DO-3 DI-1 DO-2 DI-2 DO-1 DI-3 DO-0 Note: 1. DI pin default pull up 10KΩ to +5V 2.

  • Page 48: Io Device: F75111 Under Dos

    3-8-1 IO Device: F75111 under DOS The Sample code source you can download from http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_DOS Source fi le: F75111_Dos_Src.rar Binary fi le: F75111_Dos_Bin.rar USERNAME & PASSWORD: sf How to use this Demo Application 1.Boot Ms-Dos Operating System 2.execute "75WDT.EXE" binary fi le 3.Input 1 to Enable WDT timer or input 0 to Disable it.
  • Page 49 Introduction How to use this Demo Application WriteI2CByte(I2CADDR, CONFIG, 0x03);//Set Watch Dog Timer function WriteI2CByte(I2CADDR, WDT_TIMER, timer);//Set Watch Dog Timer range from 0-255. WriteI2CByte(I2CADDR, WDT_TIMER_CTL, 0x73);//Enable Watch Dog Timer in second and pulse mode How to use this Demo Application WriteI2CByte(I2CADDR, WDT_TIMER_CTL, 0x00);...

  • Page 50: Io Device: F75111 Under Windows

    3-8-2 IO Device: F75111 under Windows The Sample code source you can download from Source fi le: F75111_DIO_Src_v2.8W(32bit).zip http://tprd.info/lexwiki/index.php/IO_Device:F75111 Binary fi le: F75111_DIO_Bin_v2.8W(32bit).zip USERNAME & PASSWORD: sf We do the demo test with a test tool which DIx connect to DOx with Relay.
  • Page 51 How to use this Demo Application one F75111 two F75111 Attention Please: You must be install vcredist_x86.exe when fi rst time you run the F75111_DIO.exe DEMO AP,The vcredist_x86.exe include all required DLL fi le. WARNING: win7 system architecture, use the system administrator to open DIO utility 1.
  • Page 52 p.s. f75111 send "F75111_SetWDTEnable(BYTE byteTimer)" including a parameter "timer", if there's no disable signal (F75111_SetWDTDisable()) to stop it before timer countdown to 0, System will reboot. if there's disable signal received, resent Enable WDT signal, for a loop to prevent from reboot F75111 Layout Picture Introduction Initial Internal F75111 port address (0x9c)
  • Page 53 Enable/Disable WDT Enable : F75111_SetWDTEnable (BYTE byteTimer) Disable: F75111_SetWDTDisable () PULSE mode Sample to setting GP33, 32, 31, 30 output 1mS low pulse signal. this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_CONTROL, 0x00); //This is setting low pulse output this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_PULSE_WIDTH_CONTROL, 0x01); //This selects the pulse width to 1mS this->Write_Byte(F75111_INTERNAL_ADDR, GPIO3X_CONTROL_MODE, 0x0F);...
  • Page 54 Get Input value BYTE F75111::InterDigitalInput() BYTE byteGPIO1X = 0; BYTE byteGPIO3X = 0; BYTE byteData = 0; this->Read_Byte(F75111_INTERNAL_ADDR,GPIO1X_INPUT_DATA,&byteGPIO1X) ; // Get value from GPIO1X this->Read_Byte(F75111_INTERNAL_ADDR,GPIO3X_INPUT_DATA,&byteGPIO3X) ; // Get value from GPIO3X byteGPIO1X = byteGPIO1X & 0xF0; // Mask unuseful value byteGPIO3X = byteGPIO3X &...
  • Page 55 //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_INPUT_DATA 0x12 // GPIO1X Input #defi ne GPIO3X_INPUT_DATA 0x42 // GPIO3X Input //-------------------------------------------------------------------------------------------------------- #defi ne GPIO2X_OUTPUT_DATA 0x21 // GPIO2X Output //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_PULSE_CONTROL 0x13 // GPIO1x Level/Pulse Control Register // 0:Level Mode // 1:Pulse Mode #defi ne GPIO1X_PULSE_WIDTH_CONTROL 0x14 // GPIO1x Pulse Width Control Register #defi...

  • Page 56: Io Device: F75111 Vb6 Under Windows

    3-8-3 IO Device: F75111 VB6 under Windows The Sample code source you can download from Source fi le: 75111_VB_v1.2.rar http://tprd.info/lexwiki/index.php/IO_Device:F75111_VB6 Binary fi le: 75111_VB_Src1.2.rar USERNAME & PASSWORD: sf How to use this Demo Application ● A Function - Choose your motherboard model ●...
  • Page 57 F75111 Layout Picture SDK Function Introduction Function EnableWDT Function EnableWDT(timer As Integer) Call WriteI2CByte(&H3, &H3) Call WriteI2CByte(&H37, timer) Call WriteI2CByte(&H36, &H73) End Function Function DisableWDT Function DisableWDT() Call WriteI2CByte(&H36, &H0) End Function...
  • Page 58 Function SetDOValue Function SetDOValue(dovalue As Integer) Dim Data As Integer Dim Value As Integer Data = 0 Value = dovalue If (Value And &H1) <> 0 Then Data = Data + &H1 End If If (Value And &H2) <> 0 Then Data = Data + &H2 End If If (Value And &H4) <>...
  • Page 59 Function CheckDIValue Function CheckDIValue() Dim GPIO1X As Integer Dim GPIO3X As Integer Dim DI1Xhex As String Dim DI3Xhex As String Dim Data As Long Data = 0 Call ReadI2CByte(&H12, GPIO1X) Call ReadI2CByte(&H42, GPIO3X) GPIO1X = GPIO1X And &HF0 GPIO3X = GPIO3X And &HF If (GPIO1X And &H10) <>...

  • Page 60: Io Device: F75111 Under Linux

    3-8-4 IO Device: F75111 under linux The Sample code source you can download from Source fi le: F75111v2.4L_SRC.tar.gz http://tprd.info/lexwiki/index.php/IO_Device:F75111_under_linux Binary fi le: F75111v2.4L_BIN.tar.gz USERNAME & PASSWORD: sf How to compile source code 1. Compile source code with Code::Blocks download and install the Code::Block with command "apt-get install codeblocks" Open an exist project(F75111.cbp) in Code::Blocks, click the compile button ( add an option 'pkg-config --libs gtk+-2.0 gthread-2.0' in "Project->Build Option- >Linker Setting->Other linker option")
  • Page 61 1. Press the "Start" button to test DIO function 2. Press the "Enable" button to test WDT function 3. Press the "Disable" button to disable WDT 4. Check the "Enable Loop" box and press "Enable" to do WDT loop test 5.
  • Page 62 Introduction IO function In fi le SMBus.c void SMBusIoWrite(BYTE byteOffset,BYTE byteData) outb( byteData , m_SMBusMapIoAddr + byteOffset); BYTE SMBusIoRead(BYTE byteOffset) DWORD dwAddrVal; dwAddrVal = inb(m_SMBusMapIoAddr + byteOffset); return (BYTE)(dwAddrVal & 0x0FF); Initial internal F75111 void F75111::InitInternalF75111() this->Write_Byte(F75111_INTERNAL_ADDR,GPIO1X_CONTROL_MODE ,0x00); //set GPIO1X to Input function this->Write_Byte(F75111_INTERNAL_ADDR,GPIO3X_CONTROL_MODE ,0x00);...
  • Page 63 Get Input value BYTE F75111::InterDigitalInput() BYTE byteGPIO1X = 0; BYTE byteGPIO3X = 0; BYTE byteData = 0; this->Read_Byte(F75111_INTERNAL_ADDR,GPIO1X_INPUT_DATA,&byteGPIO1X) ; // Get value from GPIO1X this->Read_Byte(F75111_INTERNAL_ADDR,GPIO3X_INPUT_DATA,&byteGPIO3X) ; // Get value from GPIO3X byteGPIO1X = byteGPIO1X & 0xF0; // Mask unuseful value byteGPIO3X = byteGPIO3X &...
  • Page 64 //-------------------------------------------------------------------------------------------------------- #defi ne F75111_INTERNAL_ADDR 0x9C OnBoard F75111 Chipset #defi ne F75111_EXTERNAL_ADDR 0x6E External F75111 Chipset //-------------------------------------------------------------------------------------------------------- #defi ne F75111_CONFIGURATION 0x03 Confi gure GPIO13 to WDT2 Function //-------------------------------------------------------------------------------------------------------- #defi ne GPIO1X_CONTROL_MODE 0x10 Select Output Mode or Input Mode #defi ne GPIO2X_CONTROL_MODE 0x20 Select GPIO2X Output Mode or Input Mode #defi...

  • Page 65: I 2 C Bus Interface

    3-15 I C Bus Interface CO1: I C (SM) bus connector (1 x 4 pin 1.25mm wafer) PIN NO. Description +3.3V SMB_CLK SMB_DATA Note: 1. Mating connector: MOLEX 53047-0410 or compatible 2. Cable housing: MOLEX 51021-0400 or compatible pin1 3-16 PS2 KB/MS CKM1: KB/MS port (1 X 6 pin 1.25mm wafer) PIN NO.

  • Page 66: Lan+Usb Interface

    3-15 LAN+USB Interface CL1: LAN Giga/100Mb (2 x 4pin 2.00mm wafer) PIN NO. Description PIN NO. Description TR0-/TX- TR0+/TX+ TR2+/NC TR1+/RX+ TR1-/RX- TR2-/NC TR3-/NC TR3+/NC pin1 CL11 : LAN LED (1 x 4pin 1.25mm wafer) PIN NO. DESCRIPTION Active LED 100Mb LAN GIGA LAN CL11...
  • Page 67 CL4&5: LAN Giga/100Mb (RJ45 Jack) CL4&5: LAN4 (down side)/LAN5 (up side) port connector PIN NO. Description PIN NO. Description TD0-/TX+ TD2-/NC TD0+/TX- TD2+/RX- TD1-/RX+ TD3-/NC TD1+/NC TD3+/NC RJ45 LAN Connector---LED defi ne Giga/100MB Connector Speed 10 Mbps 100 Mbps 1000 Mbps Back Side Front Sid Back Side...
  • Page 68 CUL2/CUL3 LAN + USB Connector CUL2/CUL3 (Down side): USB3.0/2.0 Type A jack PIN NO. Description PIN NO. Description USB3.0 TX+ USB 2.0 D- USB3.0 TX- USB 2.0 D+ USB3.0 RX+ USB3.0 RX- Note: 1. USB 3.0 and USB 2.0 combo Type A Jack CUL2/CUL3 (Up side): LAN Giga/100Mb RJ45 Jack PIN NO.
  • Page 69 CU1/CU2/CU3/CU4/CU5: USB2.0 ports PIN NO. Description USB DATA - USB DATA + Note: 1. Attention! Check Device Power in spec 2. Mating connector: MOLEX 53047-0410 or compatible 3. Cable housing: MOLEX 51021-0400 or compatible pin1...

  • Page 70: Sata Interface

    3-16 SATA interface SATA1/SATA2/SATA3/SATA4: SATA connectors PIN NO. Description DATA TX+ DATA TX- DATA RX- DATA RX+ Note: 1. Support SATA 3.0 spec update 6Gb/sec . 2. CPO1, CPO2 provide SATA HDD power +12V, GND, +5V SATA1 SATA2 pin1 pin1 pin1 pin1 SATA3...

  • Page 71: Module Socket

    3-17 Module socket Mini card & SIM card & M.2 card MPCE1/MPCE2: Support USB and PCIe or SATA by one Interface (Mini card socket 52pin) PIN NO. Description PIN NO. Description +3.3V +1.5V SIM Power SIM Data PCIe-CLK- SIM CLK PCIe-CLK+ SIM Reset SIM RFU...

  • Page 72: Sim Socket

    3-18 SIM socket SIM1/SIM2: SIM card socket pin defi ne is follow ISO 7816-2 smart card standard. PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA Note: 1. MPCE1 Pin 8, 10,12,14,16 for SIM1 card reader use. SIM2 SIM1...
  • Page 73 NGFF1: Support M.2 B key Type 22110 SATA Interface DESCRIPTION DESCRIPTION Top Side Bottom Side +3.3V +3.3V SATA-Detect +3.3V PCIe-CLK+ PCIe-CLK- PCIe0-TX+/SATA-TX+ PCIe-RST- PCIe0-TX-/SATA-TX- PCIe0-RX+/SATA-RX- NGFF1 PCIe0-RX-/SATA-RX+ PCIe1-TX+ +3.3V PCIe1-TX- PCIe1-RX+ PCIe1-RX- Mechanical Key DESCRIPTION DESCRIPTION Top Side Bottom Side +3.3V +3.3V Note: 1.

  • Page 74: Sodimm Socket

    3-19 SODIMM socket SODIMM1 SODIMM2 Note: 1.SODIM1/ SODIM2: SO-DIMM DDR4 1.2V DRAM Socket 2. Support un-buffer type module...

  • Page 75: Pcie X16 Gold Finger Pin Define

    3-20 PCIe X16 Gold Finger PIN Defi ne PIN NO. PIN NO. +12V +12V +12V +12V +12V +3.3V SMB_CLK +3.3V SMB_DATA +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3VAUX PCIEX16_PLT_RST# PCIE_WAKE# Mechanical Key CLK_PCIEX16_P CLK_PCIEX16_N PEG_TXP0 PEG_TXN0 PEG_RXP0 PEG_RXN0 PCIEX16_CLKREQ# PEG_TXP1 PEG_TXN1 PEG_RXP1 PEG_RXN1...
  • Page 76 PIN NO. PIN NO. PEG_TXP4 PEG_TXN4 PEG_RXP4 PEG_RXN4 PEG_TXP5 PEG_TXN5 PEG_RXP5 PEG_RXN5 PEG_TXP6 PEG_TXN6 PEG_RXP6 PEG_RXN6 PEG_TXP7 PEG_TXN7 PEG_RXP7 PEG_RXN7 PCIEX16_CLKREQ# PEG_TXP8 PEG_TXN8 PEG_RXP8 PEG_RXN8 PEG_TXP9 PEG_TXN9 PEG_RXP9 PEG_RXN9 PEG_TXP10 PEG_TXN10 PEG_RXP10 PEG_RXN10 PEG_TXP11 PEG_TXN11 PEG_RXP11 PEG_RXN11 PEG_TXP12 PEG_TXN12...
  • Page 77 PIN NO. PIN NO. PEG_RXP12 PEG_RXN12 PEG_TXP13 PEG_TXN13 PEG_RXP13 PEG_RXN13 PEG_TXP14 PEG_TXN14 PEG_RXP14 PEG_RXN14 PEG_TXP15 PEG_TXN15 PEG_RXP15 PEG_RXN15 PCIEX16_CLKREQ#...

  • Page 78: Introduction Of Bios

    Chapter-4 Introduction of BIOS The BIOS is a program located in the Flash Memory on the motherboard. This program is a bridge between motherboard and operating system. When you start the computer, the BIOS program gains control. The BIOS fi rst operates an auto-diagnostic test called POST (Power on Self Test) for all the necessary hardware, it detects the entire hardware devices and configures the parameters of the hardware synchronization.

  • Page 79: Bios Menu Screen

    Display platform information BIOS Vendor American Megatrends Core Version 5.12 Compliancy UEFI 2.5 PI 1.4 General Help Items BIOS Version CI170A/C A1 Build Date and Time 08/18/2017 11 15 14 Access Level Administrator BIOS Name 170-031 Platform Information System Date [Tue 08/30/2017]...

  • Page 80: Getting Help

    BIOS Information Display platform information BIOS Vendor American Megatrends Core Version 5.12 Compliancy UEFI 2.5 PI 1.4 BIOS Version CI170A/C A1 Build Date and Time 08/18/2017 11 15 14 Access Level Administrator BIOS Name 170-031 Platform Information System Date [Tue 08/30/2017]...

  • Page 81: Advanced

    Main menu screen includes some basic system information. Highlight the item and then use the <+> or <-> and numerical keyboard keys to select the value you want in each item. Platform Information Display platform information System Date Set the Date. Please use [Tab] to switch between data elements. System Time Set the Time.

  • Page 82: Cpu Configuration

    Serial Port Console Redirection Please refer section 1-7-7 Intel TXT Information Please refer section 1-7-8 Network Stack Confi guration Please refer section 1-7-9 CMS Confi guration Please refer section 1-7-10 USB Confi guration Please refer section 1-7-11 4-7-1 CPU Confi guration Press [Enter] to view CPU Confi...

  • Page 83: Acpi Settings

    4-7-3 ACPI Settings Main Advanced Chipset Boot Security Save & Exit ACPI Settings Enables or Disables System ability to Hibernate (DS/S4 Enable Hibernation [Enabled] Sleep State). This option ACPI Sleep State [S3 (Suspend to RAM)] may not be effective with some operating systems.

  • Page 84: F81966 Super Io Configuration

    4-7-4 F81966 Super IO Confi guration Main Advanced Chipset Boot Security Save & Exit F81966 Super IO Configuration Set Parameters of Serial Port 1(COMA) Super IO Chip F81966 Serial Port 1 Configuration Select Screen Serial Port 2 Configuration : Select Item Serial Port 3 Configuration Enter: Select Serial Port 4 Configuration...

  • Page 85: Serial Port 1 Configuration

    4-7-4-1 ►Serial Port 1 Confi guration Main Advanced Chipset Boot Security Save & Exit Serial Port 1 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled] Device Settings IO=3F8h; IRQ=4; Select Screen : Select Item Change Settings [AUTO] Enter: Select Uart Mode [RS232] +/-: Change Opt.

  • Page 86: Serial Port 2 Configuration

    4-7-4-2 ►Serial Port 2 Confi guration Main Advanced Chipset Boot Security Save & Exit Serial Port 2 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled] Device Settings IO=2F8h; IRQ=3; Select Screen : Select Item Change Settings [AUTO] Enter: Select Uart Mode [RS232] +/-: Change Opt.

  • Page 87: Serial Port 3 Configuration

    4-7-4-3 ►Serial Port 3 Confi guration Main Advanced Chipset Boot Security Save & Exit Serial Port 3 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled] Device Settings IO=3E8h; IRQ=7; Select Screen : Select Item Change Settings [AUTO] Enter: Select Uart Mode [RS232] +/-: Change Opt.

  • Page 88: Serial Port 4 Configuration

    4-7-4-4 ►Serial Port 4 Confi guration Main Advanced Chipset Boot Security Save & Exit Serial Port 4 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled] Device Settings IO=2E8h; IRQ=7; Select Screen : Select Item Change Settings [AUTO] Enter: Select Uart Mode [RS232] +/-: Change Opt.

  • Page 89: Serial Port 5 Configuration

    4-7-4-5 ►Serial Port 5 Confi guration Main Advanced Chipset Boot Security Save & Exit Serial Port 5 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled] Device Settings IO=2F0h; IRQ=7; Select Screen : Select Item Change Settings [AUTO] Enter: Select Uart Mode [RS232] +/-: Change Opt.

  • Page 90: Serial Port 6 Configuration

    4-7-4-6 ►Serial Port 6 Confi guration Main Advanced Chipset Boot Security Save & Exit Serial Port 6 Configuration Enable or Disable Serial Port (COM) Serial Port [Enabled] Device Settings IO=2E0h; IRQ=7; Select Screen : Select Item Change Settings [AUTO] Enter: Select Uart Mode [RS232] +/-: Change Opt.

  • Page 91: F81216Sec Super Io Configuration

    4-7-6 F81216SEC Super IO Confi guration Main Advanced Chipset Boot Security Save & Exit F81216SEC Super IO Configuration Set Parameters of Serial Port 1(COMA) Super IO Chip F81216SEC Serial Port 1 Configuration Select Screen Serial Port 2 Configuration : Select Item Serial Port 3 Configuration Enter: Select Serial Port 4 Configuration...

  • Page 92: Serial Port 2 Configuration

    Serial Port Use this item to enable or disable serial port (COM). The optional settings are: Enabled, Disabled. Device Settings Serial Port 1 IO=240h; IRQ=5; Change Settings Use this item to select an optimal setting for super IO device. The optional settings are: AUTO IO=240h;...

  • Page 93: Serial Port 3 Configuration

    Change Settings Use this item to select an optimal setting for super IO device. The optional settings are: AUTO IO=248h; IRQ=5; IO=240h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; IO=248h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; IO=250h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; IO=258h;...

  • Page 94: Serial Port 4 Configuration

    IO=240h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; IO=248h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; IO=250h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; IO=258h; IRQ=3, 4, 5, 6, 7, 9,10,11,12 ; Uart Mode Use this item to select COM Port as RS232, RS422 or RS485 mode. 4-7-6-4 ►Serial Port 4 Confi...

  • Page 95: Serialport Console Redirection

    4-7-7 Serial Port Console Redirection Main Advanced Chipset Boot Security Save & Exit Console Redirection Enable COM0 or Disable. Console Redirection [Disabled] Console Redirection Settings Select Screen : Select Item Legacy Console Redirection Enter: Select Legacy Console Redirection Settings +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults...

  • Page 96: Csm Configuration

    4-7-10 CSM Confi guration Main Advanced Chipset Boot Security Save & Exit Compatibility Support Module Configuration Enable/Disable CSM Support. CSM Support [Disabled] Select Screen : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 97: Chipset

    Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. Disable option will keep USB devices available only for EFI applications. The optional settings are: Enabled, Disabled. XHCI Hand-off This is a workaround for OSes without XHCI handoff support. The XHCI ownership change should be claimed by XHCI driver.

  • Page 98: System Agent (Sa) Configuration

    4-8-1 System Agent (SA) Confi guration Main Advanced Chipset Boot Security Save & Exit System Agent (SA) Configuration Memory Configuration Parameters SA PCIe Code Version 1.4.1.0 VT-d Supported Select Screen Memory Configuration : Select Item Graphics Configuration Enter: Select PEG Port Configuration +/-: Change Opt.

  • Page 99: Graphics Configuration

    4-8-1-2 Graphics Confi guration Main Advanced Chipset Boot Security Save & Exit Graphics Configuration Select which of IGFX/PEG/PCI Graphics Primary Display [Auto] device should be Primary Internal Graphics [Auto] Display Or select SG for Active LFP [No eDP] Switchable Gfx. Select Screen : Select Item Enter: Select...

  • Page 100: Peg Port Configuration

    4-8-1-3 PEG Port Confi guration Main Advanced Chipset Boot Security Save & Exit PEG Port Configuration PEG Lane Configuration PEG Lane [1x16] PEG 0:1:0 Not Present Enable Root Port [Auto] Max Link Speed [Auto] PEG 0:1:1 Not Present Enable Root Port [Auto] Max Link Speed [Auto]...

  • Page 101: Pch-Io Configuration

    4-8-2 PCH-IO Confi guration Main Advanced Chipset Boot Security Save & Exit PCH-IO Configuration PCI Express Configuration settings PCI Express Configuration SATA And RST Configuration Select Screen : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save &...

  • Page 102: Pci Express Configuration

    4-8-2-1 PCI Express Confi guration Main Advanced Chipset Boot Security Save & Exit PCI Express Configuration PCI Express Configuration settings PCIE Port assigned to LAN PCI Express Root Port 5 (I210/I211 LAN2) PCI Express Root Port 6 (I210/I211 LAN3) PCI Express Root Port 7 (I210/I211 LAN4) PCI Express Root Port 8 (I210/I211 LAN5) PCI Express Root Port 10 (Mini PCIe1) PCI Express Root Port 11 (Mini PCIe2)

  • Page 103: Pci Express Root Port 5/6/7/8 (I210/I211 Lan2/3/4/5)

    4-8-2-1-1 PCI Express Root Port 5/6/7/8 (I210/I211 LAN2/3/4/5) Main Advanced Chipset Boot Security Save & Exit PCI Express Root Port 5/6/7/8 [Enabled] Control the PCI Express ASPM [Disabled] Root Port. PCIe Speed [Auto] Detect Timeout Select Screen : Select Item Enter: Select +/-: Change Opt.

  • Page 104: Sata And Rst Configuration

    4-8-2-2 SATA And RST Confi guration Main Advanced Chipset Boot Security Save & Exit SATA And RST Configuration Enable / Disable SATA Device. SATA Controller(S) [Enabled] SATA Mod Selection [AHCI] SATA Controller Speed [Default] SATA1 Empty Port 0 [Enabled] SATA Device Type [Hard Disk Drive] SATA2 Empty...

  • Page 105: Security

    4-9 Security Main Advanced Chipset Boot Security Save & Exit Password Description Set Administrator Password If ONLY the Administrator’s password is set, then this only limits access to Setup and is only asked for when entering Setup. If ONLY the User’s password is set, then this is a power on password and must be entered to boot or enter Setup.

  • Page 106: Boot

    4-10 Boot Main Advanced Chipset Boot Security Save & Exit Boot Configuration Number of seconds to wait Setup Prompt Timeout for setup activation Key. Bootup NumLock State [On] 65535(0xFFFF) means Quiet Boot [Enabled] indefinite waiting. Driver Option Prioritiies New Boot Option Policy [Default] Select Screen : Select Item...

  • Page 107: Save & Exit

    4-11 Save & Exit Main Advanced Chipset Boot Security Save & Exit Options Save Reset the system after Save Changes and Reset saving the changes. Discard Changes and Reset Default Options Restore Defaults Boot Override Launch EFI shell from filesystem device Select Screen : Select Item Enter: Select...

  • Page 108: Chapter 5 Driver Installation

    Chapter-5 DRIVER INSTALLATION There is a system installation DVD in the package. This DVD does not only include all the drivers you need but also some other free application programs and utility programs. In addition, this DVD also includes an auto detect software telling you which hardware is installed and which driver is needed so that your system can function properly.
  • Page 109 AUTOMATIC DRIVER INSTALLATION menu 1. INF install Intel SkyLake chipset driver 2. VGA install onboard VGA driver 3. HD Audio install ALC HD Audio Codec driver 4. ME Tool install Intel Management Engine Interface driver 5. LAN install LAN driver Each selection is illustrated below:...

  • Page 110: Inf Install Intel Skylake Chipset Driver

    5-1 INF Install Intel SkyLake Chipset Driver 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Intel® Chipset Device Software" menu" screen, click "INF". screen, click "Next". 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, click "Accept"...

  • Page 111: Vga Install Intel Lvy Skylake Vga Driver

    5-2 VGA Install Intel SkyLake VGA Driver 1. At the "AUTOMATIC DRIVER INSTALLATION 2. At the "Welcome to the Setup Program" menu "screen, click "VGA". screen, Click "Next". 4. At the "Readme File Information" screen, 3. At the "License Agreement" screen, Click "Yes".

  • Page 112: Hd Audio Install Realtek High Definition Audio Driver

    5. At the "Setup Progress" screen, Click 6. Click "Finish" to restart computer. "Next". NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64bit / Windows 10 64bit X:\driver\sky_lake\VGA\x64\Setup.exe For Windows 7 32bit X:\driver\sky_lake\VGA\x86\Setup.exe 5-3 HD Audio Install Realtek High Defi nition Audio Driver 1.

  • Page 113: Me Tools Install Intel Management Engine Intergace Driver

    3. Click "Finish" to restart computer NOTE: SYSTEM INSTALL will auto detect fi le path For Windows 7 64 bit / Windows 10 64 bit X:\driver\sky_lake\Audio\0006-64bit_Win7_Win8_Win81_Win10_R279.exe For Windows 7 32bit X:\driver\sky_lake\Audio\Win7_Win8_Win81_R273.exe 5-4 ME Tools Install Intel Management Engine Interface Driver 2.
  • Page 114 3. At the "License Agreement" screen, 4. At the "Readme File Information" screen, Click "Yes". Click "Next". 5. Click "Finish" to restart computer. NOTE: The path of the fi le For Windows 7 32-bit X:\driver\sky_lake\ME\SetupME.exe KMDF 1.11 installation required before Intel ME 10 driver installed X:\driver\sky_lake\ME\KMDF_Win7\kmdf-1.11-Win-6.1-x86.msu For Windows 7 64-bit X:\driver\sky_lake\ME\SetupME.exe...

  • Page 115: Lan Install Intel Lan Driver

    5-5 LAN Install Intel LAN Driver 1. At the "AUTOMATIC DRIVER 2. At the "Intel® Network Connections" INSTALLATION menu" screen, Click "LAN" screen, Click" Install Drivers and Software. 3. Click "Next". 4. At the "License Agreement" screen, Click "Next".
  • Page 116 5. At the "Setup Options" screen, Click "Next". 6. Click "Next". 8. Click "Finish". 7. At the "Ready to Install the Program screen, Click "Insatll".
  • Page 117 8. Click "Exit". NOTE: The path of the fi le For Windows 7 64/32-bit / Windows 10 64-bit X:\driver\sky_lake\LAN\Autorun.exe...

  • Page 118: How To Update Insyde Bios

    5-6 How to update Insyde BIOS Step 1. To run afuwingui.exe then click "Open" Step 2. Click the new version BIOS (download from the website)
  • Page 119 Step 3. Choose "ProgramAll Blocks" and "Do Not Check ROM ID" Step 4. Click "Flash" Step 5. Click "Exit" and restart computer.

  • Page 120: Appendix A:power Consumption Test

    Appendix A: Power Consumption Test Condition Item Spec Intel Skylake-S Memory SODIMM DDR4 2133 16GB x 2 Operating System Windows 10_64bit Test Program 3D Mark 06 HDD 3.5" SATA Standard HDD HDD 2.5" SATA Slim Type HDD mSATA 16GB Test Result for reference only ! Start up Operation Shut down...

  • Page 121: Appendix B:resolution List

    Appendix B: Resolution list 640 x 480 x ( 256 / 16bit / 32bit ) 800 x 600 x ( 256 / 16bit / 32bit ) 1024 x 768 x ( 256 / 16bit / 32bit ) 1152 x 864 x ( 256 / 16bit / 32bit ) 1280 x 600 x ( 256 / 16bit / 32bit ) 1280 x 720 x ( 256 / 16bit / 32bit ) 1280 x 768 x ( 256 / 16bit / 32bit )

This manual is also suitable for:

Ci170c

Table of Contents