Table of Contents
Advertisement
Assembly Instructions
1. Mount the main body onto what has been completed in step B.
C.
Align two
6
Self-tapping screws and two
the screw holes, then tighten the screws.
(Note: The product can be heavy at this step, so it's best to
have two people when carrying it)
D.
After assembling the overall piano frame, insert
into the holes at the bottom of the main body and attach
by using the binding wire.
12
4
hand screws to
7
7
6
Pedal line
12
E.
Place the piano in a static location in your room, then unscrew the screw nut
for fixation until it presses against the floor. Do not unscrew the screw nut earlier,
or it will scratch your floor.
Binding wire
Start-up
1.
Make sure the power is off. Before you switch the instrument on,
dial down the volume on the keyword as well as the volume of
any connected audio equipment to a minimum level.
2.
Connect the AC/DC power adapter to the power socket on the
backside of the main body and plug the other side into the
power outlet.
3.
Switch on the piano. Lit LED lights indicate that the piano is turned on.
To turn off the product, press the "Power" button.
4.
To prevent accidental power-offs, the product can be turned off
only when the button is pressed for a longer time.
How to Use
power socket
Note:
For safety reasons, unplug the instrument when not in use
for extended periods of time, or during thunderstorms.
5
Advertisement
Table of Contents
