Malekko Quad LFO Manual page 7

QUAD LFO MANUAL V.1
CONTROLS
FREQUENCY:
Sets the frequency of an LFO.
PHASE:
Sets the phase of an LFO.
- Start point from 0 degrees to 360 degrees
SHAPE:
Moving this slider left to right will morph the shape of
the LFO from:
SINE - RAMP - TRIANGLE - SAW - PULSE
(10 to 90% pulsewidth).
DISTORT:
Moving this slider left to right will change the type of
distortion applied to an LFO:
FOLD - BIT CRUSH - NOISE
LEVEL:
Adjust the level of an LFO output.
The LEDs to the right of these sliders indicate the
position of the slider (brightest red for sliders set all the
way to the right).
PG. 5